English Publications

 

  • Effect of tandem submerged arc welding process and parameters of Gleeble simulator thermal cycles on properties of the intercritically reheated heat affected zone,S. Moeinifar, A. H. Kokabi, H. R. Maddah Hosseini, MATERIALS & DESIGN, 2011
  • Theoretical and experimental investigation into friction stir welding of AA5086,H. Jamshidi Avval, S. Seraj Zadeh, A. H. Kokabi, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011
  • Role of tandem submerged arc welding thermalcycles on properties of the heat affected zone in X80 microalloyed pipeline steel,S. Moeinifar, A. H. Kokabi, H. R. Maddah Hosseini, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011
  • Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing,M. Aziziyyeh, A. H. Kokabi, P. Abachi, MATERIALS & DESIGN, 2011
  • Thermo-mechanical and microstructural issues in dissimilar friction stir welding of AA5086–AA6061, H. Jamshidi Avval, S. Seraj Zadeh, A. H. Kokabi, JOURNAL OF MATERIALS SCIENCE,
  • Effect of solidification mechanism on microstructure and mechanical properties of joint in TLP bonded Al2024-T6 Alloy,M. Mahmoudi Ghaznavi, A. A. Ekrami, A. H. Kokabi, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2011
  • Effect of welding parameters on residual stresses in dissimilar joint of stainless steel to carbon steel, E. Ranjbar Nodeh, S. Seraj Zadeh, A. H. Kokabi, JOURNAL OF MATERIALS SCIENCE, 2011
  • Finite element modeling of the effect of heat input on residual stresses in dissimilar joints, E. Ranjbar Nodeh, S. Seraj Zadeh, A. H. Kokabi, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010
  • The influence of tool geometry on thermomechanical and microstructural behaviour in frictionstir welding of AA5086, H. Jamshidi Avval, S. Serajzadeh, A. H. Kokabi, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART CJOURNAL OF ME, 2010
  • A Study on Residual Stresses in Gas Tungsten Arc Welding of AA5251, A. R. Kohan dehghan, S. Seraj Zadeh, A. H. Kokabi, MATERIALS AND MANUFACTURING PROCESSES, 2010
  • Fatigue Life estimation of spot welds using a crack propagation-based method with consideration of residual stresses effect, S. E. Mirsalehi, A. H. Kokabi, MATERIALS SCIENCE AND ENGINEERING A -STRUCTURAL MATERIALS PROPERTIES MICROST, 2010
  • The effect of functionally graded material structure on wear resistance and toughness of repaired weldments, A. Roshan Ghias, M. Barzegari, A. H. Kokabi, MATERIALS & DESIGN, 2010
  • Semisolid Joining of Aluminium A356 alloy by partial remelting and mechanical stirring, M. J. Alvani, H. Ashuri, A. H. Kokabi, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010
  • Influence of peak temperature during simulation and real thermal cycles on microstructure and fracture properties of the reheated zones, S. Moeinifar, A. H. Kokabi, H. R. Maddah Hosseini, MATERIALS & DESIGN, 2010
  • Failure analysis of brazed air passages of an aircraft fuel system, P. Behjati, A. R. Etemadi, H. R. Maddah Hosseini, A. H. Kokabi, ENGINEERING FAILURE ANALYSIS,2010
  • Constrained groove pressing of low carbon steel: Nano-structure and Mechanical properties, F. Khodabakhshi, M. Kazemi Nejad, A. H. Kokabi, MATERIALS SCIENCE AND ENGINEERING A -STRUCTURAL MATERIALS PROPERTIES MICROST, 2010
  • Investigation of weld pool in aluminum alloys: geometry and solidification microstructure, A. Farzadi, S. Seraj Zadeh, A. H. Kokabi, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2010
  • Constrained groove pressing of low carbon steel: Nano-structure and mechanical properties, Khodabakhsh, M. Kazeminejad, A. H. Kokabi, MATERIALS SCIENCE AND ENGINEERING A -STRUCTURAL MATERIALS PROPERTIES MICROST, 2010
  • Investigation of weld pool in aluminium alloys: Geometry and solidification microstructure, Farzadi, S. Serajzadeh, A. H. Kokabi, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2010
  • Welding characteristics of ultrahigh strength steel in annealed and quench-tempered conditions, Roshanghias, Barzegari, A. H. Kokabi, H. R. Maddah Hosseini, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010
  • The Change In The Chemical Composition And Toughness Of Api 5l-X70 Welds By Additionti, B. Beidokhti, A. H. Kokabi, A. Dowlati, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009
  • An investigation on the soldering of Al 3003/Zn sheets, M. Movahhedi, A. H. Kokabi, H. R. Maddah Hosseini, MATERIALS CHARACTERIZATION, 2009
  • Influences of titanium and manganese on high strength low, B. Beidokhti, A. H. Kokabi, A. Dowlati, MATERIALS CHARACTERIZATION, 2009
  • Effects of alloying elements and microstructure on the susceptibility, B. Beidokhti, A. Dowlati, A. H. Kokabi, MATERIALS SCIENCE AND ENGINEERING A -STRUCTURAL MATERIALS PROPERTIES MICROST, 2009
  • Prediction of Grain Growth Behavior in HAZ During Gas Tungsten Arc Welding of 304 Stainless Steel, H. Jamshidi Avval, S. Seraj Zadeh, A. H. Kokabi, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2009
  • Structural changes of radial forging die surface during service under thermo-mechanical fatigue, F. Nemat Zadeh, M. R. Akbarpour, A. H. Kokabi, S. K. Sadrnejad, MATERIALS SCIENCE AND ENGINEERING A -STRUCTURAL MATERIALS PROPERTIES MICROST, 2009
  • Microstructural evolution and mechanical properties of semisolid stir welded zinc AG40A die-cast alloy, A. R. Nariman Nejad, H. Ashuri, A. H. Kokabi, A. Khosravani, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009
  • Roles of preoxidation, Cu2O particles, and interface pores on the strength of eutectically bonded Cu/a- Al2O3, H. Ghasemi, A. H. Kokabi, M. Al Faghihi Sani, Z. Riazi, MATERIALS & DESIGN, 2009
  • Effect of bonding temperature on microstructure development during TLP bonding of a nickel base superalloy, M. Pooranvari, A. A. ekrami, A. H. Kokabi, JOURNAL OF ALLOYS AND COMPOUNDS, 2009
  • The change in the chemical composition and toughness of API 5L-X70 welds by addition of Titanium, B. Beidokhti, A. H. Kokabi, A. Dowlati, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009
  • An Investigation on the Densification and Microstructural Evolution of M2/316L Stepwise Graded Composite during Co-Sintering, V. Firouzdor, A. Simchi, A. H. Kokabi, JOURNAL OF MATERIALS SCIENCE, 2008
  • The Influence of Roll Bonding Parameters on the Bond Strength of Al-3003/Zn Soldering Sheets, M. Movahhedi, H. R. Maddah Hosseini, A. H. Kokabi, MATERIALS SCIENCE AND ENGINEERING A -STRUCTURAL MATERIALS PROPERTIES MICROST, 2008
  • Microstructure-Properties Relationship of TLP bonded GTD-111 Nickel Base Superalloy, M. Pooranvari, A. A. Ekrami, A. H. Kokabi, MATERIALS SCIENCE AND ENGINEERING A -STRUCTURAL MATERIALS PROPERTIES MICROST, 2008
  • Effect of Iron Particle Size on the Diffusion Bonding of Fe-5%Cu Powder Compact to Wrought Carbon Steels, M. Gholamhossein Filabi, A. Simchi, A. H. Kokabi, MATERIALS & DESIGN, 2008
  • Microstructure Development during Transient Liquid Phase Bonding of GTD-111, M. Pooranvari, A. A. ekrami, A. H. Kokabi, JOURNAL OF ALLOYS AND COMPOUNDS, 2008
  • Phase-field simulation of weld solidification microstructure in an Al–Cu alloy, A. Farzadi, M. Do-Dang, S. Serajzadeh, A. H. Kokabi, G. Amberg, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2008
  • Theoretical and experimental study of microstructures and weld pool geometry during GTAW of 304 stainless steel, H. Jamshidi Avval, A. Farzadi, S. Serajzadeh, A. H. Kokabi, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008
  • Prediction of the Solidification Behavior of the weld pool through Modeling of Heat Transfer and Fluid Flow during Gas Tungsten Arc Welding of Commercial Pure, A. Farzadi, S. Serajzadeh, A. H. Kokabi, MATERIALS SCIENCE AND TECHNOLOGY, 2008
  • Semisolid Joining of Zinc AG40A Alloy by Partial Remelting and Mechanical Stirring, A. R. Narimannejad, H. Ashuri, A. H. Kokabi, A. Khosravani, A. Foroughi, M. Kiani, SOLID STATE PHENOMENA, 2008
  • Effect of titanium addition on the microstructure and inclusion formation, B. Beidokhti, A. H. Kokabi, A. dowlati, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008
  • Alumina – Copper Eutectic Bond Strength: Contribution of Preoxidation, Cuprous Oxides Particles, H. Ghasemi, M. A. Faghihi Sani, A. H. Kokabi, Z. Riazi, Scientia Iranica, 2008
  • Effect of welding variants on morphology and ferrite number of type 316 stainless steels, M. Shahedi Asl, A. H. Kokabi, P. Mehdizadeh Tehrani, 2008
  • The influnce of ratio of rotational speed traverse speed on mechanical properties of AZ31v friction stir welds, Abbasi, A. H. Kokabi, Gh. Daneshi, Shalchi, Sarrafi, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008
  • Effect of transient liquid phase diffusion bonding on microstructure and properties of nickel base supper alloy rene 80, A. A. Ekrami, S. Moeinifar, A. H. Kokabi, MATERIALS SCIENCE AND ENGINEERING A -STRUCTURAL MATERIALS PROPERTIES MICROST, 2007
  • modeling of heat transfer and fluid flow during GTAW of commercial pure Al, A. Farzadi, S. Serajzadeh, A. H. Kokabi, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007
  • Crack initiation & kinking behaviours of spot welded coach peel specimens under cyclic loading, S. Daneshpour, A. H. Kokabi, A. A. Ekrami, A. K. Motarjemi, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007
  • simulation of welding residual stresses in resistance spot welding, FEM modeling and X-ray verification, E. Ranjbar Nodeh, S. Serajzadeh, A. H. Kokabi, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007
  • Effect of preweld microstructure on HAZ liquation creckings of Rene 80 superalloy, Shahsavari, A. H. Kokabi, S. Nategh, MATERIALS SCIENCE AND TECHNOLOGY, 2007
  • Evaluotion of micro structure and machanical properties in friction stir welded a356+15% SiCp cast composite, Amirizad, A. H. Kokabi, Abbasi, Sarrafi, Shalchi, Aziziyeh, MATERIALS LETTERS, 2006
  • Joining Metals by Combining Mechanical Stirring and Thermomechanical Treatment to Form a Globular Weld Structure, B. Shalchi Amir Khiz, H. Ashuri, A. H. Kokabi, M. Abbasi Gharacheh, J. Molla, SOLID STATE PHENOMENA, 2006
شرکت مهندسی پیشگامان جوش شریف