Immobilization of functionalized gold nanoparticles in a well-organized silicon-based microextracting chip followed by online thermal desorptiongas chromatography
Misagh Allahdadlalouni, Habib Bagheri, Cyrus Zamani
Microchemical Journal, 143 (2018) 205-211
doi: 10.1016/j.microc.2018.07.040
In this survey, firstly, a silicon wafer-based microchip, possessing a 50-cm microchannel with the dimensions of
120 and 60 μm, was manufactured by chemical etching technique. Subsequently, the inner surface of the microchannel was coated with a primary layer of gold nanoparticles synthesized by galvanic displacement. Then a
self-assembled monolayer of 3-mercaptopropyltriethoxysilane was immobilized on the first layer. Eventually, a
polydimethylsiloxane film with a thickness of 16 ± 1 μm was formed on the walls of the microchannel by means
of sol-gel method. Field emission scanning electron microscopy and atomic force microscopy were extensively
employed to investigate the status of both microchip fabrication and the multilayer coating steps. The entire
surface of the prepared microchip was sealed by thin borosilicate glass plate. Furthermore, a ceramic plate with a
screen-printed platinum heater was attached to the back of the silicon wafer microchip in order to heat up the
microchannel during thermal desorption process. Additionally, a six-port injection valve was utilized between
the microchip and nitrogen source allowing the stream of sample and heated gas being introduced into the
microchannel. By adopting this extraordinary strategy, the so-called lab-on-a-valve endowed with the feature of
direct conjunction with the injection port of the gas chromatography which so far been rarely considered. This
lab-on-a-valve system was successfully exploited to evaluate its extraction/desorption capability in analysis of
broad categories of model compounds.