Zahra Nasiri-Gheidari

Professor

 

 

     Publications & Patents

  • Journal Papers:

     

         

       M.R. Eesazadeh, Z. Nasiri-Gheidari, “Winding Selection for Wound-Rotor Synchro”, in IEEE Sensors Journal, early access

     

       H. Lasjerdi, Z. Nasiri-Gheidari, “Improving the Performance of Variable Reluctance Resolver Against Short Circuit Using Physical Parameters”, Scientia Iranica, 2023

     

    •    M. Ghaem-Maghami and Z. Nasiri-Gheidari, "Design Optimization of Linear Variable-Reluctance Resolver for Higher Accuracy and Smaller Size," in IEEE Sensors Journal, vol. 23, no. 15, pp. 16764-16771, 1 Aug.1, 2023, doi: 10.1109/JSEN.2023.3288288.

     

       A. Ashouri-Zadeh, Z. Nasiri-Gheidari, “Force Ripple Reduction Methods for Tubular Permanent Magnet Linear Machines”, Scientia Iranica, 2023

     

      S. A. Seyed-Bouzari, H. Saneie and Z. Nasiri-Gheidari, "Analysis and Compensation of the Longitudinal End-Effect in Variable Reluctance Linear Resolvers Using Magnetic Equivalent Circuit Model," in IEEE Transactions on Transportation Electrification, doi: 10.1109/TTE.2023.3239500.

     

    •    M. KhajueeZadeh, F. Zare and Z. Nasiri-Gheidari, "Reliability Analysis of Two Resolver Configurations Under Faulty Conditions in 2DOF System," in IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1-8, 2023, Art no. 9000408, doi: 10.1109/TIM.2022.3229711, vol. 72, 2023

     

    •    H. Saneie, Z. Nasiri-Gheidari and A. Belahcen, "On the Field-Reconstruction Method for Electromagnetic Modeling of Resolvers," in IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1-8, 2023, Art no. 9000608, doi: 10.1109/TIM.2022.3224527,vol. 72, 2023   

     

    •    M.S. KhajueeZadeh, S. Feizhoseini, Z. Nasiri-Gheidari, and M. Behzad “Analysis of Torsional Vibrations on the Resolver under Eccentricity in PMSM Drive System, IEEE Sensors Journal, early access

     

    •    A. Keyvannia, and Z. Nasiri-Gheidari, " A Comprehensive Winding Method for Linear Variable-Reluctance Resolvers to Compensate for the End Effects " in IEEE Transactions on Industrial electronics, early access

     

    •    F. Zare and Z. Nasiri-Gheidari, “Improving the performance of helical motion resolver based on accurate modelling of longitudinal end effect”, IET Electric Power Applications, vol. 16, no. 10, pp. 1212-1222, 2022

     

      A. Koushki, Z Nasiri Gheidari, “On Performance Analysis of Coreless Permanent Magnet Machine”, Electromechanical Energy Conversion Systems, vol. 2, no.1, 2022

     

    •    F. Zare and Z. Nasiri-Gheidari, "Helical Motion Wound-Rotor Resolver," in IEEE Sensors Journal, vol. 22, no. 10, pp. 9371-9377, 15 May15, 2022, doi: 10.1109/JSEN.2022.3167427.

     

    •     F. Zare and Z. Nasiri-Gheidari, "Magnetic Equivalent Circuit Model for Predicting Performance of 2DOF Wound Rotor Resolver," in IEEE Sensors Journal, vol. 21, no. 19, pp. 21417-21424, 1 Oct.1, 2021, doi: 10.1109/JSEN.2021.3102068.

     

    •    F. Zare A. Keyvannia, and Z. Nasiri-Gheidari, " Presentation of a Novel Variable-Reluctance Tubular Resolver," in IEEE Transactions on Industrial electronics, early access

     

    •    G. Rezazadeh, F. Tahami, G. -A. Capolino, Z. Nasiri-Gheidari, H. Henao and M. Sahebazamani, "Improved Design of an Outer Rotor Six-Phase Induction Motor with Variable Turn Pseudo-Concentrated Windings," in IEEE Transactions on Energy Conversion, doi: 10.1109/TEC.2021.3126538

     

    •    G. Rezazadeh, F. Tahami, G. Capolino, Z. Nasiri-Gheidari, H. Henao and M. Sahebazamani, "Improved design of a Six-Phase Squirrel Cage Induction Motor with Pseudo-Concentrated Windings," in IEEE Journal of Emerging and Selected Topics in Industrial Electronics, doi: 10.1109/JESTIE.2021.3137056.

     

    • •   F. Zare and Z. Nasiri-Gheidari, "Winding Function Model for Predicting Performance of 2-DOF Wound Rotor Resolver," in IEEE Transactions on Transportation Electrification, early access

    • •  A. Moheyseni, Z. Nasiri-Gheidari and R. Alipour-Sarabi, "Slotless Disk Type Resolver: A Solution to Improve the Accuracy of Multi-Speed Wound Rotor Resolvers," in IEEE Transactions on Transportation Electrification, doi: 10.1109/TTE.2021.3111702.

    • •  F. Zare and Z. Nasiri-Gheidari, "Magnetic Equivalent Circuit Model for Predicting Performance of 2DOF Wound Rotor Resolver," in IEEE Sensors Journal, doi: 10.1109/JSEN.2021.3102068.

    • •  M.S. KhajueeZadeh, H. Saneie, and Z. Nasiri-Gheidari, " Development of a Hybrid Reference Model for Performance Evaluation of Resolvers," in IEEE Transactions on Instrumentation and Measurement, early access.

    • •  H. Saneie and Z. Nasiri-Gheidari, "Generalized Non-Overlapping Tooth Coil Winding Method for Variable Reluctance Resolvers," in IEEE Transactions on Industrial Electronics, doi: 10.1109/TIE.2021.3084157.

    • •  F. Zare and Z. Nasiri-Gheidari, "Proposal of a 2DOF Wound-Rotor Resolver," in IEEE Sensors Journal, doi: 10.1109/JSEN.2021.3089540.

    • •  A. Paymozd, H. Saneie, A. Daniar and Z. Nasiri-Gheidari, "Accurate and Fast Subdomain Model for Electromagnetic Design Purpose of Wound-Field Linear Resolver," in IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1-8, 2021, Art no. 9003408, doi: 10.1109/TIM.2021.3080400.

    • •  S. Hajmohammadi, H. Saneie, Z. Nasiri-Gheidari and F. Tootoonchian, "Optimal Design and Performance Analysis of a Double-Sided Multi-Turn Wound-Rotor Resolver," in IEEE/ASME Transactions on Mechatronics, doi: 10.1109/TMECH.2021.3066815.

    • •  H. Saneie, A. Daniar, and Z. Nasiri-Gheidari, “Design Optimization of a Low Speed Small Scale Modular Axial Flux Permanent Magnet Synchronous Generator for Urban Wind Turbine Application”, Scientia Iranica, early access

    • H. Lasjerdi, and Z. Nasiri-Gheidari, “A Comprehensive Analysis of Short-Circuit Fault in Wound-Rotor Resolvers”, IEEE Trans. On Vehicular Technology, early access

     

    • •  H. Saneie, Z. Nasiri-Gheidari, F. Tootoonchian, and A. Daniar “Simplified Winding Arrangement for Integrated Multi-Turn Resolvers”, IEEE Transactions on Industrial Electronics, accepted for publication

    •  M. Bahari, Z. Nasiri-Gheidari, and F. Tootoonhian, “Modeling, Performance Analyzing, and Prototyping of Variable Reluctance Resolver with Toroidal Winding”, IEEE Sensors Journal, early access

     

    •  H. Lasjerdi, Z. Nasiri-Gheidari, F. Tootoonchian, “Static Eccentricity Fault Diagnosis in Wound-Rotor Resolvers”, IEEE Sensors Journal, vol. 21, no. 2, pp. 1424-1432, 2021

     

    •   H. Saneie, and Z. Nasiri-Gheidari, “Performance Analysis of Outer-Rotor Single-Phase Induction Motor Based on Magnetic Equivalent Circuit (MEC)”, IEEE Transactions on Industrial Electronics, vol. 68, no. 2, pp. 1046-1054, 2021

     

    • M. Bahari, Z. Nasiri-Gheidari, “The Comparative Analysis of AC-Flux and DC-Flux Resolvers”, Scientia Iranica, , early access

     

    • A. Paymozd, H. Saneie, Z. Nasiri-Gheidari, F. Tootoonchian, “Subdomain Model for Predicting the Performance of Linear Resolver Considering End Effect and Slotting Effect”, IEEE Sensors Journal, vol. 20, no. 24, pp. 14747-14755, 2020

     

    •  H. Lasjerdi, Z. Nasiri-Gheidari, F. Tootoonchian, “Online Static/Dynamic Eccentricity Fault Diagnosis in Inverter-Driven Electrical Machines using Resolver Signals”, IEEE Trans. On Energy Conversion, vol. 35, no. 4, pp. 1973-1980, 2020

     

    • G. Rezazadeh, F. Tahami, G. Capolino, S. Vaschetto, Z. Nasiri-Gheidari, H. Henao, “Improvement of Concentrated Winding Layouts for Six-Phase Squirrel Cage Induction Motors”, IEEE Trans. On Energy Conversion, vol. 35, no. 4, pp. 1727-1735, 2020

     

    • H. Saneie, Z. Nasiri-Gheidari and F. Tootoonchian, “Structural Design and Analysis of a High Reliability Multi-Turn Wound-Rotor Resolver for Electric Vehicle”, IEEE Trans. on Vehicular Technology, vol. 69, no. 5, pp. 4992-4999, 2020

     

    • S. Haj-Mohammadi, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Influence of Different Installation Configurations on the Position Error of a Multi-Turn Wound-Rotor Resolver”, IEEE Sensors Journal, vol. 20, no. 11, pp. 5785 - 5792, June 2020

     

     • H. Saneie, Z. Nasiri-Gheidari, and F. Tootoonchian, “Design and Prototyping of a Multi-Turn Sinusoidal Air-gap Length Resolver”, IEEE Trans. on Energy Conversion, vol. 35, no. 1, pp. 271 – 278, March 2020

     

    •  M. Bahari, A. Davoodi, H. Saneie, F. Tootoonchian, and, Z Nasiri-Gheidari, “A New Variable Reluctance PM-Resolver”, IEEE Sensors Journal, vol. 20, no. 1, pp. 135 – 142, Jan. 2020

      

    •    R. Alipour-Sarabi, Z. Nasiri-Gheidari, and H. Oraee, “Development of a 3-D Magnetic Equivalent Circuit Model for Axial Flux Machines”, IEEE Transactions on Industrial Electronics, vol. 67, no. 7, pp. 5758 – 5767, July 2020

     

     •   S. Tavakoli, and Z. Nasiri-Gheidari, “Static Eccentricity Fault Diagnosis in a Cylindrical Wound-Rotor Resolver”, International Journal of Industrial Electronics, Control and Optimization, vol. 3, no.1, pp. 19-26, 2020

    •  •    M. Ghasemian, F. Tahami, and Z. Nasiri-Gheidari, “Optimal design of a flux reversal permanent magnet machine as a wind turbine generator”, Turkish Journal of Electrical and Computer Sciences, vol. 28, pp. 693 – 707, 2020

    • •   H. Saneie, Z. Nasiri-Gheidari, and F. Tootoonchian, “Accuracy Improvement in Variable Reluctance Resolvers”, IEEE Trans. on Energy Conversion, vol. 34, no. 3, pp. 1563 – 1571, Sept. 2019

    •  •   M. Bahari, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Proposal of Winding Function Model for Geometrical Optimization of Linear Sinusoidal Area Resolver”, IEEE Sensors Journal, vol. 19 no. 14, pp. 5506 – 5513, July 2019

       

       •  M. Mohammad-Yari, M. Safari, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Optimal Winding Selection for Wound-Rotor Resolvers”, Scientia Iranica, early access

        

       •    M. Rayati, S. Amirzadeh Goghari, Z. Nasiri-Gheidari, A.M. Ranjbar, “An optimal and decentralized transactive energy system for electrical grids with high penetration of renewable energy sources”, Electrical Power and Energy Systems, vol.113, pp. 850–860, 2019

    •  •    M. Alemi-Rostami, R. Alipour-Sarabi, G. Rezazadeh, Z. Nasiri-Gheidari, and H. Oraee, “Design Optimization of a Double-Stage Resolver”, IEEE Transactions on Vehicular Technology, vol. 68, no. 6, pp. 5407 – 5415, June 2019

       

       •   R. Alipour-Sarabi, Z. Nasiri-Gheidari, and H. Oraee, “Misconception of Total Harmonic Distortion in resolvers”,  Electromechanical Energy Conversion Systems (EECS), vol. 1, no. 01, 38-43, 2019

          

       •   H. Lasjerdi, Z. Nasiri-Gheidari, F. Tootoonchian, “A Comprehensive Mathematical Model for Analysis of WR-Resolvers under Stator Short Circuit Fault”, Journal of Electrical and Computer Engineering Innovations, vol. 7, no. 1, pp. 11-18, 2019

        

       •  R. Alipour-Sarabi, Z. Nasiri-Gheidari, F. Tootoonchian and H. Oraee, “Improved Winding Proposal for Wound   Rotor Resolver Using Genetic Algorithm and Winding Function Approach”, IEEE Transactions on Industrial Electronic, vol. 66, no. 2, pp. 1325-1334, 2019

    • •  F. Zare, Z. Nasiri-Gheidari, and F. Tootoonchian, “The effect of winding arrangements on measurement accuracy of sinusoidal rotor resolver under fault conditions”, Measurement, Elsevier, vol. 131, pp. 162-172, 2019

    •  •  H. Saneie, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Challenges of Finite Element Analysis of Resolvers”, IEEE Trans. On Energy Conversion, vol. 34, no. 2, pp. 973-983, 2018

    •   •  M. Ghods, Z. Nasiri-Gheidari, and H. Oraee, “Performance Analysis of Permanent Magnet Vernier Generator under Mechanical Faults”, International Journal of Industrial Electronics, Control and Optimization, vol. 1, no. 2, pp. 121-131, Sep. 2018

    •   •  F. Abolqasemi Kharanaq, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Magnetic Equivalent Circuit Model for Wound Rotor Resolver without Rotary Transformer’s Core”, IEEE Sensors J., vol. 18, no. 21, pp. 8693-8700, 2018
       

    •  • M. Rayati, S. Amirzadeh Goghari, Z. Nasiri-Gheidari, and A. M. Ranjbar, “Robust and Dynamic Transactive Energy System Using Tsypkin-Polyak Theorem”, IET Smart Grid, vol. 1, no. 2, pp. 57-65, 2018

    •  • A Daniar, Z Nasiri-Gheidari, F Tootoonchian, “Performance Analysis of Linear Variable Reluctance Resolvers Based on Improved Winding Function Approach”, IEEE Energy Conversion, vol. 33, no. 3, pp. 1422-1430, SEPTEMBER 2018

    •  • M. Ghods, Z. Nasiri-Gheidari, F. Tootoonchian and H. Oraee, " Design Improvement of a Small, Outer Rotor, Permanent Magnet Vernier Generator for Supplying Traffic Enforcement Camera”, IEEE Energy Conversion, vol. 33, no. 3, pp. 1213-1221, SEPTEMBER 2018

    •  • H. Saneie, Z. Nasiri-Gheidari, F. Tootoonchian, “Design-Oriented Modeling of Axial-flux Variable-reluctance Resolver Based on Magnetic Equivalent Circuits and Schwarz–Christoffel Mapping”, IEEE Transactions on Industrial Electronic, vol. 65, no. 5, pp. 4322-4330, May 2018.

    •  • R. Alipour-Sarabi, Z. Nasiri-Gheidari, F. Tootoonchian and H. Oraee, "Performance Analysis of Concentrated Wound-Rotor Resolver for Its Applications in High Pole Number Permanent Magnet Motors," IEEE Sensors J., vol. 17, no. 23, pp. 7877-7885,Dec. 2017

    •  • Z. Nasiri-Gheidari, “Design, Performance Analysis, and Prototyping of Linear Resolvers”, IEEE Energy Conversion, Vol.  32, no. 4, pp. 1-10, Dec. 2017

       

       • A Daniar, Z Nasiri-Gheidari, F Tootoonchian, “Position Error Calculation of Linear Resolver under Mechanical Fault Conditions”, IET Science, Measurement & Technology, vol. 11, no. 7, pp. 948-954, 2017

       

       • H. Saneie, Z. Nasiri-Gheidari, F. Tootoonchian, “An Analytical Model for Performance Prediction of Linear Resolver”, IET Electric Power Applications, vol. 11, no. 8, pp. 1457-1465, Sep. 2017

    • R. Alipour-Sarabi, Z. Nasiri-Gheidari, F. Tootoonchian, and H. Oraee, “Analysis of Winding Configurations and Slot-Pole Combinations in Fractional-Slots Resolvers”, IEEE Sensors Journal, Vol. 17, no. 14, pp. 4420-4428, July 2017

    Z. Nasiri-Gheidari, R. Alipour-Sarabi, F. Tootoonchian, and F. Zare, “Performance Evaluation of Disk Type Variable Reluctance Resolvers”, IEEE Sensors Journal, Vol. 17, no. 13, pp. 4037-4045, July 2017

     

    Z. Nasiri-Gheidari, F. Tootoonchian, “The Influence of Mechanical Faults on the Position Error of an Axial Flux Brushless Resolver without Rotor Windings”, IET Electric Power Applications, Vol. 11, no. 4, pp. 613-621, 2017

     

    R. Alipour-Sarabi, Z. Nasiri-Gheidari, F. Tootoonchian, and H. Oraee, “Effects of Physical Parameters on the Accuracy of Axial Flux Resolvers”, IEEE Transactions on Magnetics, Vol. 53, no. 4, pp. 1-11, April 2017, DOI: 10.1109/TMAG.2016.2645163

     

    •   Z. Nasiri-Gheidari, “Design, Analysis, and Prototyping of a New Wound-Rotor Axial Flux Brushless Resolver”, IEEE Transaction on Energy Conversion, Vol. 32, no. 1, pp. 276 - 283, 2017, DOI: 10.1109/TEC.2016.2604858

     Z. Nasiri-Gheidari, F. Tootoonchian, and F. Zare “Design Oriented Technique for Mitigating Position Error Due To Shaft Run-out in Sinusoidal-Rotor Variable Reluctance Resolvers,” IET Electric Power Applications, vol. 11, no. 1, pp. 132 – 141, 2017, DOI: 10.1049/iet-epa.2016.0316

     

     F. Tootoonchian, Z. Nasiri-Gheidari, “Twelve-slot Two-Saliency Variable Reluctance Resolver with Nonoverlapping Signal Windings and Axial Flux Excitation”, IET Electric Power Applications, Vol. 11, no. 1, pp. 49 – 62, 2017, DOI: 10.1049/iet-epa.2016.0252

     

    F. Tootoonchian, Z. Nasiri-Gheidari, “Cogging force mitigation techniques in a modular linear permanent magnet motor”, IET Electric Power Applications, Vol. 10, no. 7,8, pp. 667-674, 2016

      

    F. Tootoonchian, Z. Nasiri-Gheidari, H. Lesani, “Design, analysis, and implementation of extra low air-gap single-phase axial-flux induction motors for low-cost applications”, Int. Trans. Electr. Energ. Syst., Vol. 26, no. 12, pp. 2516-2531,December 2016, DOI: 10.1002/etep.2217

     

    Z. Nasiri-Gheidari, F. Tootoonchian, “Electromagnetic Design Optimization of a Modular Linear Flux-Reversal Motor”, Electric Power Component and System, Vol. 44, no. 18, pp. 2112-2120, Oct 2016

     

    • M.H. Ravanji, Z. Nasiri-Gheidari, "Design optimization of a ladder secondary single-sided linear induction motor for improved performance", IEEE Transaction on Energy Conversion, Vol.30 , no. 4 , 12 August 2015, pp. 1595 – 1603

    • Z. Nasiri-Gheidari, F. Tootoonchian, “Axial flux resolver design techniques for minimizing position error due to static eccentricities”, IEEE Sensors Journal, vol. 15, Issue 7, pp. 4027 - 4034, July 2015.

     

    • Z. Nasiri-Gheidari, H. Lesani, “Optimal Design of Adjustable Air-gap Two-speed Capacitor-run Single phase Axial-flux Induction Motor”, IEEE Transaction on Energy Conversion, vol. 28, Issue 3, pp. 543 - 552, Sept. 2013 .

    • Z. Nasiri-Gheidari, H. Lesani, “New Design Solution for Static Eccentricity in Single Stator-Single Rotor Axial Flux Induction Motors”, IET Electric Power Applications, Vol. 7 , Issue 6, July 2013

    • Z. Nasiri-Gheidari, H. Lesani, “Investigation of Characteristics of a Single-Phase Axial Flux Induction Motor Using 3D FEM and d-q Model”, IET Electric Power Applications, Vol. 7 , Issue 1, pp. 47 – 57, Jan. 2013

    • C. Lucas, Z. Nasiri Gheidari, F. Tootoonchian, “Application of an Imperialist Competitive Algorithm to the Design of a Linear Induction Motor”, Energy Conversion and Management, vol. 51, pp. 1407-1411, January 2010

    • Z. Nasiri-Gheidari, H. Lesani, “Using Stator Discharge Current for the Parameter Estimation of a Single-Phase Axial Flux Induction Motor” Scientia Iranica, Transactions D - Electrical Engineering, Vol. 19, Issue 6, pp. 1794–1801, December 2012.

    • Z. Nasiri-Gheidari, H. Lesani, “A Survey on Axial Flux Induction Motors”, PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), ISSN 0033-2097, Vol. 88, no. 2, pp. 300-305, 2012

    • Z. Nasiri-Gheidari, H. Lesani, “Design Optimization of a Single-Phase Axial Flux Induction Motor with Low Torque Ripple”, PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), ISSN 0033-2097, Vol. 88, no. 3b, pp. 168-172, 2012

    • H. Lesani, A. Darabi, Z. Nasiri Gheidari, F. Tootoonchian, “Very fast field oriented control for permanent magnet hysteresis synchronous motor”, Iranian Journal of Electrical & Electronic Engineering, Vol. 2, No. 1,pp. 34-40, January 2006.

    • D. A. Khaburi, F. Tootoonchian and Z. Nasiri-Gheidari, “Parameter Identification of a Brushless Resolver Using Discharge Response of Stator Current”, Iranian Journal of Electrical & Electronic Engineering, Vol. 3, No. 1 &2, pp. 42-52, Jan. 2007.

    • Z. Nasiri-Gheidari, H. Lesani and F. Tootoonchian, “A New Hunting Control Method for Permanent Magnet Hysteresis Motors”, Iranian Journal of Electrical & Electronic Engineering, Vol. 2, No. 3 &4, pp. 121-130, July 2006.

    • D. A. Khaburi, F. Tootoonchian and Z. Nasiri-Gheidari, “Dynamic Performance Prediction of Brushless Resolver”, Iranian Journal of Electrical & Electronic Engineering, Vol. 4, No. 3,pp. 94-103, July 2008.

    • C. Lucas, F. Tootoonchian, Z. Nasiri-Gheidari, "Multi-Objective Design Optimization of a Linear Brushless Permanent Magnet Motor Using Particle Swarm Optimization (PSO)", Iranian Journal of Electrical & Electronic Engineering, vol. 6, no. 3, pp. 183–189, September 2010.

    • C. Lucas, Z. Nasiri-Gheidari, F. Tootoonchian, "Using Modular Pole for Multi-objective Design Optimization of a Linear Permanent Magnet Synchronous Motor by Particle Swarm Optimization (PSO)", Iranian Journal of Electrical & Electronic Engineering, Vol. 6, No. 4, pp. 214-223, Dec. 2010.

     

    • Z. Nasiri-Gheidari, H. Lesani, F. Tootoonchian, “Performance Prediction of a Single-Phase Capacitor-Run Axial Flux Induction Motor under Static Eccentricity”, Australian Journal of Electrical & Electronics Engineering, vol. 11, no. 1, pp. 93, 2014

    • Z. Nasiri-Gheidari, H. Lesani, “Theoretical Modeling of Axial Flux Squirrel Cage Induction Motor Considering both Saturation and Anisotropy”, European Transactions on Electrical Power ( International Transactions on Electrical Energy Systems), vol. 24, no. 3, pp. 335-346, 2014
     

    زهرا نصيري قيداري، حميد لساني، احمد دارابي، فريد توتونچيان، " کنترل برداری موتور هيسترزيس سنکرون سه فاز با تفکیک متغیرهای d وq"، فصلنامه فناوری و آموزش، سال اول، جلد اول، شماره 4، صص 175 تا  188، تابستان 1386

    • زهرا نصيري قيداري، حميد لساني، احمد دارابي، فريد توتونچيان، " تحلیل ديناميکي موتور هيسترزيس سنکرون آهنربای دائم با در نظر گرفتن اثر فوکو"، فصلنامه فناوری و آموزش، سال دوم، جلد دوم، شماره 1، صص 27 تا 36، پاییز 1386.

    • حميد لساني، زهرا نصيري قيداري، فريد توتونچيان، "یک روش جدید برای دینامومتری موتورهای القایی تکفاز"، فصلنامه علمی پژوهشی انجمن مهندسی برق ایران، سال پنجم، شماره اول، صص 68 تا 79 ، بهار و تابستان 1387

     

    زهرا نصيري قيداري، " بررسي تأثير شار نشتي ترانسفورماتور گردان روي موقعيت خروجي ريزالورهاي بدون جاروبک شار محوري"، مجله مهندسی برق دانشگاه تبریز، دوره 47، شماره 2، تابستان 1396، صص 741-749

     

     ا. پایمزد، ح. صانعی و ز. نصیری قیداری، " مدل سازی ریزالور خطی با در نظر گرفتن اثر انتهایی طولی "، مجله علمی پژوهشی الکترومغناطیس کاربردی، مهر ماه 99

     



  • Conference Papers:

     

    •  H. Lasjerdi and Z. Nasiri-Gheidari, "Fault Detection in Variable Air-gap Resolver," 2023 14th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC), Babol, Iran, Islamic Republic of, 2023, pp. 1-6, doi: 10.1109/PEDSTC57673.2023.10087148.

     

    •  M. Nikzad, Z. Nasiri-Gheidari, “Hall Effect Gear Tooth Magnetic Encoder”, The Second International Conference on Electrical Motors and Generators –ICEMG 2023, 1-2 March, 2023, Sabzevar, Iran.

     

     •   M. KhajueeZadeh, M. Emadaleslami and Z. Nasiri-Gheidari, "A High-Accuracy Two-Stage Deep Learning-Based Resolver to Digital Converter," 2022 13th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC), 2022, pp. 71-75, doi: 10.1109/PEDSTC53976.2022.9767427.

     

     •  S. Samareh-TaheriNasab, M. KhajueeZadeh, Z. Nasiri-Gheidari and S. Sheikhaei, "A Low-Cost Linearized Analog Resolver-To-DC Converter," 2022 30th International Conference on Electrical Engineering (ICEE), 2022, pp. 619-623, doi: 10.1109/ICEE55646.2022.9827090  

     

     •  F. Zare, Z. Nasiri-Gheidari, and A. Daniar, “A Reliable Integrated Resolver for High Precision Radial-Linear Position Measurement”, IEEE SDEMPED 2021, USA, 2021

     

    •     G. Rezazadeh, F. Tahami, G. Capolino, Z. Nasiri-Gheidari, H. Henao, A. Yazidi, M. Sahebazamani, “Design of a Six-Phase Squirrel Cage Induction Motor with Pseudo-Concentrated Windings”, 2020 International Conference on Electrical Machines (ICEM), pp. 2097-2103, 23-26 Aug. 2020

     

    •     H. Lasjerdi, Z. Nasiri-Gheidari, and F. Tootoonchian “Condition Monitoring of Wound Rotor Resolvers”, 28th Iranian Conference on Electrical Engineering (ICEE), 2020, Tabriz, Iran

     

    •   M.S. KjajueeZadeh, Z. Nasiri-Gheidari, and F. Tootoonchian “Study of Noise and Vibration in Wound Rotor Resolvers”, 28th Iranian Conference on Electrical Engineering (ICEE), 2020, Tabriz, Iran

     

    • ف. زارع، ز. نصيری قیداری، ف. توتونچيان، " بررسی تاثیر تعداد قطب‌ و نوع سیم‌پیچی بر عملکرد ریزالور رلوکتانس متغیر رتور سینوسی "، اولين کنفرانس بین المللی موتورها و ژنراتورهای الکتريکی، سبزه وار، ايران

     

     •  H. Lasjerdi, Z. Nasiri-Gheidari, and F. Tootoonchian “Proposal of an Analytical Model for Performance Evaluation of WR-Resolvers under Short Circuit Fault”, 27th Iranian Conference on Electrical Engineering (ICEE), 2019, Yazd, Iran, (selected as the Best paper of conference)

     

     • A. Farhadi-Biranvand, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Selection of Excitation Signal Waveform for Improved Performance of Wound-Rotor Resolver”, PEDSTC 2019, Shiraz, Iran

     

     • S. Hajmohammadi, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Design Considerations of Multi-Turn Wound-Rotor Resolvers”, PEDSTC 2019, Shiraz, Iran

     

     • G. Rezazadeh, S. Vaschetto, F. Tahami, GA. Capolino, H. Henao, Z. Nasiri-Gheidari, “Analysis of Six-Phase Induction Motor with Distributed and Concentrated Windings by Using the Winding Function Method” 2018 XIII International Conference on Electrical Machines (ICEM), pp. 2423-2429, 2018

     

     • M. Bahari, Z. Nasiri-Gheidari, “Longitudinal End Effect in a Variable Area Linear Resolver and its Compensating Methods”, 26th Iranian Conference on Electrical Engineering (ICEE), 2018, Mashhad, Iran

     

     • M. Ghods, Z. Nasiri-Gheidari, F. Tootoonchian and A. Oraee, “Performance Evaluation of Permanent Magnet Vernier Generator Based on Modified Winding Function Method”, 26th Iranian Conference on Electrical Engineering (ICEE), 2018, Mashhad, Iran

     

     • R. Alipour-Sarabi, Z. Nasiri-Gheidari, F. Tootoonchian and A. Oraee, F. Zare, “Linearized Resolver”, 26th Iranian Conference on Electrical Engineering (ICEE), 2018, Mashhad, Iran,

     

     • F. Abolqasemi Kharanaq, Z. Nasiri-Gheidari, and F. Tootoonchian, “Analysis of Winding Arrangement on Position Error of Axial Flux Wound-Rotor Resolver”, PEDSTC 2018, Tehran, Iran

     

     • G. Rezazadeh, M.Ghasemian, and Z. Nasiri-Gheidari, “Ultra Low Vibration and Low Acoustic Noise Multi-Stage Switched Reluctance Machine”, PEDSTC 2018, Tehran, Iran

     

     •A. Mradnouri, P. Elhamnia, M. Vakilian and Z. Nasiri-Gheidari, “Comparison of Short Circuit Force of a Symmetric Core versus a Core Type 3-phaseTransformer”, PSC 2017, Tehran, Iran

     

     • H. Saneie, Z. Nasiri-Gheidari, F. Tootoonchian, “The influence of Winding’s Pole Pairs on Position Error of Linear Resolvers”, 25th Iranian Conference on Electrical Engineering (ICEE), 2017, Tehran, Iran

     

    A. Daniar, Z. Nasiri-Gheidari, “The Influence of Different Configurations on Position Error of Linear Variable Reluctance Resolvers”, 25th Iranian Conference on Electrical Engineering (ICEE), 2017, Tehran, Iran

     

    •   س. اميرزاده، م. رعيتی، ز. نصيری قيداری، ع. رنجبر، " طراحی و کنترل کننده‌ی ثالثيه فرکانس در سيستم‌های قدرت با نفوذ بالای نيروگاه بادی در حضور مکانيزم بازار پويا"، 25 امين کنفرانس مهندسی برق ايران

     

        • Z. Nasiri-Gheidari, F. Tootoonchian, “An Optimized Axial Flux Variable Reluctance Resolver with Concentric Windings”, 24th Iranian Conference on Electrical Engineering (ICEE), 2016, Shiraz, Iran, pp. 1284 - 1290, DOI: 10.1109/IranianCEE.2016.7585719

     

    • J. Faiz, Z. Nasiri-Gheidari, M. Azizur Rahman, “Performance Verification of Saturated IPM Bearingless Motors Considering Magnetic Pull Variation”, 17th IEEE-PEMC conference, 25-30 Sep. 2016, Varna, Bulgaria

     

    زهرا نصیری قیداری،" چگونه يك تلسكوپ بسازيم"؛ كنفرانس دانش آموزي فيزيك ايران، مرداد ماه 1376، اصفهان، (برنده لوح تقدیر کنفرانس).

    • زهرا نصیری قیداری،" چگونه يك عدسي كاو بسازيم"؛ كنفرانس دانش آموزي فيزيك ايران، مرداد ماه 1377، كرمان، (برنده لوح تقدیر کنفرانس)


    • S.Vaez-zadeh, Z. Nasiri-Gheidari, F. Tootoonchian “Vector Control of IPM motor with Maximum torque and efficiency”, proceeding of 14th Iranian Conference on Electrical Engineering, Amirkabir Univ. of Tech., Tehran, Iran, 16-18 May, 2006.

    • H.Lesani, A. Darabi, Z.Nasiri Gheidari, “Dynamic Performance Prediction of Poly phase Hysteresis Motors With Considering Eddy Current Effect”, 3rd International Conference on “Technical and Physical Problems in Power Engineering” (TPE-2006), Gazi University, Ankara, TURKEY, pp. 138-142 , May 29-31, 2006.

    • H.Lesani, A. Darabi, Z.Nasiri Gheidari, “ Starting & Synchronizing Of Conventional Hysteresis Motors With Comparison of Permanent Magnet Hysteresis Motors”, 3rd International Conference on “Technical and Physical Problems in Power Engineering” (TPE-2006), Gazi University, Ankara, TURKEY, pp. 222-226, May 29-31, 2006.

    • H.Lesani, Z.Nasiri Gheidari, F. Tootoonchian “A Novel P.C. Base Electromotor’s Dynamometery”, 3rd International Conference on “Technical and Physical Problems in Power Engineering” (TPE-2006), Gazi University, Ankara, TURKEY, pp. 222-226, May 29-31, 2006.

    • Z.Nasiri Gheidari , H. Lesani, A. Darabi, “A Novel Optimized Eigenvalue Based Three Phase Hysteresis Motors Hunting Control”, IPEC conference, Philadelphia University, Jordan, 19-21 September 2006.


    زهرا نصيري قيداري، حميد لساني، احمد دارابي، فريد توتونچيان، " مدل سازي ديناميکي موتور هيسترزيس سنکرون با در نظر گرفتن اثر فوکو"، ایران، همایش تخصصی کاربردی سامانه های ناوبری NSRC2006، دی ماه 1385.

    • فريد توتونچيان، زهرا نصيري قيداري، " تعیین زاویه بهینه پره های توربین بادی براساس جايابي بهينه مقادير ویژه ژنراتور القایی"، بیست و دومین کنفرانس بین المللی برق، 28 تا 30 آبان ماه سال 1386.

    • سعید افشارنیا، زهرا نصیری قیداری، " يک روش ترکيبي جديد برای جبران بار در سيستم سه فاز چهار سيمه در شرايط مختلف ولتاژ تغذيه"، مجموعه مقالات هفدهمین کنفرانس مهندسی برق ایران (ICEE2009)، دانشگاه علم وصنعت ایران، جلد دوم، قدرت – سیستم، 22-24 اردیبهشت 1388، صص. 557-563

    • امیرعباس شایگانی اکمل، زهرا نصیری قیداری، " مطالعه مروري اندازه گيري تخليه جزئي"، مجموعه مقالات هفدهمین کنفرانس مهندسی برق ایران (ICEE2009)، دانشگاه علم وصنعت ایران، جلد دوم، قدرت – سیستم، 22-24 اردیبهشت 1388، صص. 213-218

     

    • فرید توتونچیان، زهرا نصیری قیداری، " تشخيص خطاي ناهم محوري و اتصال كوتاه در ژنراتور سنكرون در كاربرد همزمان آن به عنوان سنسور موقعيت زاويه اي"، سی امین کنفرانس بین المللی برق، 11 تا 13 آبان ماه سال 1394، تهران، ایران

     

       

     

  • Patents:

    •  زهرا نصیری قیداری ،فرید توتونچیان، « ریزالور دیسکی با رتور سیم پیچی شده با حذف هسته ترانسفورماتور گردان»، اسفند 1394.

    • فرید توتونچیان، زهرا نصیری قیداری، « ریزالور شار محوری با رتور بدون سیم پیچی»،  اسفند 1394.

    • فرید توتونچیان، زهرا نصیری قیداری، « سیستم انتقال گشتاور بدون تماس»، مهرماه 1385.