LANGUAGE ABILITY

1.                  1- Persian: mother tongue

2.          2- France: very good in verbal and written communication skill

      3- English: medium in verbal and written communication skill

1. Ph.D. in Materials Science and Engineering, 1981, I.N.S.A. Lyon, France
2. M.Sc. in Solid State Physics, 1975, University of Lyon, France
3. B.Sc. in Physics, 1973, Tabriz University, Iran

Publications

 Peer-Reviewed Conference Papers, Journal Papers
 

1-        A. Vineent, S.M. Seyed Reihani and J. Perez, “The Nature of Dislocation-Pinning Defects in Cold-Worked Aluminum Studied by Ultrasonic Waves”,        

Phys. Stat.  Sol. (a) 39, (1977), p. 651.

2-        S.M. Seyed Reihani, C. Esnouf and G. Fantozzi, “Determination of Dislocation Pinning and Depinning Stages in Cold-Worked Copper”,

Script. Met. 1, (1978), pp. 627-631.

3-        S.M. Seyed Reihani, C. Esnouf, G. Fantozzi and G. Revel, “Frottenent Interieur D’un Magnesium de Haute Purete’ Deforme Plastiquement”,

J. de phys. Lettres 39, L-429 (1978).

4-        S.M. Seyed Reihani, G. Fantozzi, C. Esnouf and G. Revel, “Behavior of the Bordoni Relaxation in a High Purty Magnesium after Plastic Deformation”,

Script. Met. 13, (1979), pp. 1011-1015.

5-        G. Fantozzi, S.M. Seyed Reihani, C. Esnouf and G. Revel, “Internal Friction of High Parity Magnesium after Plastic Deformation”,

Proceeding of the Third European Conference,

 University of Manchester England, 18-20 July (1980).

6-          S.M. Seyed Reihani, C. Esnouf, G. Fantozzi and G. Revel, “Effect of Impurities on the Internal Friction Spectrum of Magnesium after Plastic Deformation”,

ICIFUAS-7 (International Conference) 6-9 July 1981, Lausanne Switzerland.

7-        A. Vincent, S.M. Seyed Reihani, G. Fanozzi and J. Perez, “Dislocation – Point Defects Interaction in Magnesium”,

ICIFUAS-7 (International Conference), 6-9 July 1981, Lausanne Switzerland.

8-        P. Merle, D. Dafir, S.M. Seyed Reihani, “Study of the Influence of the Reinforcement on Precipitation Kinetics in Al 6061/SiCp”,

Proc. of the Ninth International Conference on Composite Materials

(ICCM/9) Madrid 12-16 July 1993.

9-        S.M. Seyed Reihani, D. Dafir and P. Merle, “Experimental Analyses of the Acceleration of β׳ Precipitation in a 6061/SiCp Composite”,

Script. Met. et Mat. 28, (1993), pp. 639-644.

10-    S.M. Seyed Reihani, “Study of the Enhanced Precipitation of an Aluminum 6061 Alloy Reinforced by SiC Particles in the Rang of β׳׳ Phase Temperature”,

J. of Eng. Islamic Rep. of Iran, 8, 55 (1995).

11-    S.M. Seyed Reihani, A. Karimi Taheri and A. Khodadad Motarjemi, “The Effects of Aging Treatment on the Shape Memory Property of a Copper based Alloy”,

THERMEC’97, International Conference on Thermomechanical

Processing of Steels and other Materials, University of Wollongong,

Australia 7-11 July (1997), p. 1713.

12-    H.M. Madaah Hosseini, M. Akhavan, S.M. Seyed Reihani, H. Yoozbashi Zadeh and A. Kianvash, “A New Composition for Binary Alloy Arocesing of Nd-Fe-B Sintered Magnets”,                                                                                                                                                     

      Conf. PM Auto 99, Isfahan, Iran.

13-    H.R. Madaah Hosseini, S.M. Seyed Reihani and H. Yoozbashi Zadeh, “Microstructure – Properties Relationship of (Fe, Nd-B) Permanent Magnets Processed by Binary Alloy Method”,

Conf. P.M. Auto 99, Isfahan, Iran.

 Accepted: ISME 2000 Sharif University, Tehran, Iran.

14-    H.R. Madaah Hosseini, S.M. Seyed Reihani, H. Yoozbashi Zadeh and M. Akhavan, “The Influence of Heat Treatment on the Microstructure and Magnetic Properties of (Nd_11.9MM_2.8) (Fe_73.9Co_3.3 Ni_1.1) B₆Magnets”,

Conf.  M.SM-99 Tehran-Iran.

15-    H.R. Madaah Hosseini, A. Kianvash, S.M. Seyed Reihani and H. Yoozbashi Zadeh, “Production of (Nd, MM)₂(Fe, Co, Ni)₁₄ B-type Sintered Magnets Using a Binary Powder Blending Technique”,

J. of Alloys and Compounds, 298, (2000), pp. 319-323.

16-    H.R. Madaah Hosseini, A. Kianvash, S.M. Seyed Reihani and H. Yoozbashi Zadeh, “Binary Powder Blending (B.P.B.T): An Effective Method in Production of (Nd, MM)₂(Fe,Co,Ni)₁₄ B- type Corrosion Resistant Magnets”,

Proc. Of the Sixteenth International Workshop on Rare-Earth Magnets,

The Japan Institute of Metals, (2000).

17-    H.R. Madaah Hosseini, A. Kianvash, H. Yoozbashi Zadeh and S.M. Seyed Reihani, “A Correlation between Intrinsic Coercivity - Electrical – Conductivity – Thermal Treatment in a Nd_11.9MM_2.9Fe_73.9Co_3.3Ni_6.9B_6.9 – type Magnet”,

J. of  Alloys and Compounds, 314 (2001), pp. 251-256.

18-    S.M. Zebarjad, A. Lazzeri, R. Bagheri, S.M. Seyed Reihani and M. Forunchi, “Role of the Interface on the Deformation Mechanism of Glass Fiber Polypropylene Composites”,

J. of Materials Science Letters, 21, (2002), pp. 1007-1011.

19-    H. Khorsand, H. Yoozbashi Zadeh, S.M. Habibi, K. Janghorban, A. Nangir and S.M. Seyed Reihani, “Carbon, Prosity and Fatigue in Sintered Steel”,

Metal Powder Report, Vol. 57, No. 4, (2002).

20-    H. Khorsand, S.M. Habibi, H. Yoozbashi Zadeh, K. Janghorban, S.M. Seyed Reihani, H. Rahmani Seraji and M. Ashtari, “The Role of Heat Treatment on Wear Behavior of Powder Metallurgy Low Alloy Steels”,

J. of Materials and Design, 23, (2002), pp. 667-670.

21-     H. Khorsand, S.M. Habibi, H. Yoozbashi Zadeh, K. Janghorban and
S.M. Seyed Reihani, “Investigation of Microstructure and Fatigue Properties of Low Alloy Sintered Steel by Heat Treatment”,

P/M Science and Technology, Vol. 4, No. 2, (2002), pp. 18-22.

22-    S.M. Zebarjad, A. Lazzeri, R. Bagheri, S.M. Seyed Reihani and M. Forunchi, “Fracture Mechanism under Dynamic Loading of Elastomer – Modified Poly Propylene”,

J. Material Letters, 57, (2003), pp. 2733-2741. 

23-    S.M. Zebarjad, R. Bagheri, S.M. Seyed Reihani and M. Forunchi, “Investigation of Deformation Mechanism in Poly Propylene / Glass Fiber Composites”,

J. of Applied Polymer Science, 87, (2003), pp. 2171-2176.

24-    S.M. Zebarjad, R. Bagheri, S.M. Seyed Reihani and A. Lazzeri, “Deformation, Yield and Fracture of Eleslomer – Modified Poly Propylene”,

J. of Applied Polymer Science, 90, (2003), pp. 3767-3779.

25-    H. Khorsand, S.M. Habibi, H. Yoozbashi Zadeh, K. Janghorban, S.M. Seyed Reihani and H. Rahmani Seraji, “Fatigue of Sintered Steels (Fe-1.5Mo-3Mn-0.7C)”,

Materials and Structure 37, (2004), pp. 335-341.

26-    R. Ehsani and S.M. Seyed Reihani, “Aging Behavior and Tensile Properties of Squeeze Cast Al 6061/SiC metal matrix composites”,

Scientia Iranica. Vol. 11, No.4 (2004).

27-    A.H. Tavakoli, S.M. Seyed Reihani, A. Simchi, ‘Effect of Cyclic Compaction on the Consolidation of Al/SiC Composite Powder”,

PM 2004 Congress and Exhibition, (2004), pp. 599-604.

28-    S.M. Seyed Reihani, “Processing of Squeeze Cast Al 6061-30 Vol. % SiC Composites and their Characterization”,

J. Materials and Design, Vol. 27/3, (2004), pp. 216-222.

29-    S. Esmaeelzadeh, A. Simchi, S.M. Seyed Reihani, “Development of P/M AlSi7-SiC Composite Foams for Automotive Applications”,

PM Auto “05”,(2005), pp. 246-254.

30-    A. H. Tavakoli, A. Simchi, S.M. Seyed Reihani, “Study of the consolidation of composite powders under monotonic and cyclic loading”,

Composites Science and Technology, 65, (2005), pp. 2094–2104.

32.    R. Ahmadi, A. Simchi, A. Mahdavi, S.M. Seyed Reihani, “Synthesis of Silver and Copper-Tin Alloy Nanopowders by Inert Gas Consolidation Method”,

Materials and Design, (2005), In print (accepted for publication).

33.    R. Ahmadi, A. Simchi, S.M. Seyed Reihani, “Synthesis of silver nanoparticles by the inert gas consolidation method”,

Amirkabir Journal of Science and Technology, 16, (2005), pp. 103-107.

34.    A. Hosseini Monnazah, A. Simchi, S.M. Seyed Reihani, “Creep Behavior of Hot Extruded Al-5%SiC Composite Powder”,

Powder Metallurgy World Congress, 2006,

 24-28 September, Korea, Vol. 534-536, pp. 861-864. 

35.    Z. Razavi Hesabi, A. Simchi, S.M. Seyed Reihani, “Structural Evolution during Mechanical Milling of Nanometric and Micrometric Al₂O₃ Reinforced Al Matrix Composites”,

Materials Science and Engineering, (2006), Vol. A. 428, pp. 159-168.

36.    A. Simchi, R. Ahmadi, S.M. Seyed Reihani and A. Mahdavi, “Kinetics and Mechanisms of Nanoparticle Formation and Growth in Vapor Phase Condensation Process”,

Materials and Design, Vol. 28, (2007), pp. 850-856.

37.    Z. Razavi Hesabi, S. Kamrani, A. Simchi, S.M. Seyed Reihani, “Effect of Nanoscaled Reinforcement Particles on the Structural Evolution of Aluminum Powder during Mechanical Milling”, 

Powder Metallurgy, (2007), in press

38.    S. Kamrani, A. Simchi, R. Riedel, S.M. Seyed Reihani, “Effect of Reinforcement Volume Fraction on the Mechanical Alloying of Al-SiC Nanocomposite Powder”,

Powder Metallurgy, 50, (2007), pp. 276-282.

39.    A. Hosseini Monnazah, A. Simchi, S.M. Seyed Reihani, “Creep Behavior of Hot Extruded Al-5% SiC Composite Powder”,

Materials Science Forum Vols. 534-536, (2007), pp. 861-864.

40.    Z. Razavi Hesabi, A. Simchi, S.M. Seyed Reihani, F. Simancik, M. Balog, A. Csuba, “Mechanical Properties of Al-Al₂O₃ Nanocomposite Produced by Mechanical Milling and Powder Hot Extrusion”,

Euro PM2007- Miniaturization & Nanotechnology in PM, (2007)

41.    A. Simchi, S. Kamrani, S.M. Seyed Reihani, “Processing of Al-SiC Nanocomposite Powder by High-Energy Ball Milling”,

Journal of Materials Processing Technology, (2007), in press

42.    A. Simchi, R. Ahmadi, S.M. Seyed Reihani, A. Mahdavi, “Kinetics and Mechanisms of Nanoparticle Formation and Growth in Vapor Phase Condensation Process ”,

Materials and Design, 28 (2007), pp. 850-856.

43.    Z. Razavi Hesabi, M. Sanjari, A. Simchi, S.M. Seyed Reihani, “Effect of Alumina Nanoparticles on the Hot Deformation Behavior of Aluminum”,

Proceedings of the 2^nd Conference on Nanostructures (NS 2008), Kish Island, I.R. Iran

44.    H.R. Hafizpour, A. Simchi, S.M. Seyed Reihani, “Analysis of the Consolidation Behavior of Aluminium/Nano-SiC Composite Powder Using Non-Linear Compaction Equation”,

Proceedings of the 2^nd Conference on Nanostructures (NS 2008) ), Kish Island, I.R. Iran

45.    H. Arami, A. Simchi, S.M. Seyed Reihani, “Mechanical Induced Reaction in Al-Cuo System for In-Situ Fabrication of Al Based Nanocomposites”,

Journal of Alloys and Compounds, 465, (2008), pp. 151-156.

46.    Z. Razavi Hesabi, M. Sanjari, A. Simchi, S.M. Seyed Reihani, F. Simancik, “Effect of Alumina Nanoparticles on Hot Strenght and Deformation Behavior of Al-5vol%Al₂O₃ Nanocomposite: Experimental Study and Modelling”,

Journal of Nanoscience and Nanotechnology, Vol. 9, (2009), pp. 1-5.

47.    M. Jamali, Kh. Farokhzadeh, R. Bagheri, S.M. Seyed Reihani, “Architecturally Modified Al-DRA Composites: The Effect of Size and Shape of the DRA Rods on Fracture Behavior”,

Journal Mater Science, Vol. 45, (2010), pp. 2852-2861.

48.    A. Hosseini Monazzah, A. Simchi, S.M. Seyed Reihani, “Creep Behavior of Hot Extruded Ak-Al₂O₃ Nanocomposite Powder”,

Materials Science and Engineering A, Vol. 527, (2010), pp. 2567-2571.

49.    S.M.R. Mousavi Abarghouie, S.M. Seyed Reihani, “Aging Behavior of a 2024 Al Alloy-SiCp Composite”,

Materials and Design, Vol. 31, (2010), pp. 2368-2374.

50.    S.M.R. Mousavi Abarghouie, S.M. Seyed Reihani, “Investigation of Friction and Wear Behaviors of 2024 Al and 2024 Al-SiCp Composite at Elevated Temperatures”,

Journal of Alloys and Compounds, Vol. 501, (2010), pp. 326-332.

51.    M. Movahedi, A.H. Kokabi, S.M. Seyed Reihani, “Investigation on the Bond Strength of Al-1100/St-12 Roll Bonded Sheets, Optimization and Characterization”,

Materials and Design, Vol. 32, (2011), pp. 3143-3149.