SHARIF UNIVERSITY OF TECHNOLOGY

School of Mechanical Engineering

Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: sharif-logo 

Home

Publications

Graduate Students Supervised

Experiences

Research

Teaching

Workshops

 

 Google Scholar: https://scholar.google.co.uk/citations?user=VAeE9ZUAAAAJ

 

PUBLICATIONS

Refereed Journal Papers:

1.     Farrahi G H, Markho P H and Maeder G, A study of fretting wear with particular reference to measurement of residual stresses by X-ray diffraction, Wear 148(1991), pp. 249-261

2.     Farrahi G H and Maeder G, An experimental study of fretting by means of X-ray diffraction, Fatigue Fract. Engng Mater. Struct., 15(1992), pp.91-102

3.     Fernando U S, Farrahi G H and Brown M W, Fretting fatigue crack growth behaviour of BS L65 4% copper aluminium alloy under constant normal load, Fretting Fatigue, ESIS 18(Edited by R B Waterhouse and T C Lindley), Mechanical Engineering Publications, London, (1994), pp. 183-195

4.     Farrahi G H and Lebrun J L, Surface hardness measurement and microstructural characterisation of steel by X-ray diffraction profile analysis, Journal of Engineering, Vol. 8, No. 3(1995), pp. 159-167

5.     Farrahi G H, Lebrun J L and D Couratin, Effect of shot peening on residual stress and on fatigue life of a spring steel, Fatigue Fract. Engng Mater. Struct., 18(1995), pp. 211-220

6.     Majzoubi G H, Farrahi G H , Dynamic and quasi-static tensile properties of structural S400 steel Journal of Engineering, 13(1999), pp. 51-60

7.     Smith D J, Farrahi G H, Zhu W X and McMahon C A, Obtaining multiaxial residual stress distribution from limited measurements, Journal of Materials Science and Engineering A, 303 (2001), pp. 281-191

8.     Smith D J, Farrahi G H, Zhu W X and McMahon C A, Experimental measurement and finite element simulation of the interaction between residual stresses and mechanical loading, International Journal of Fatigue, 23(2001), pp.293-302

9.     Farrahi G H, Smith D J, Zhu and McMahon, Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components, International Journal of Engineering, Vol. 15, No. 1, (2002), pp.79-86

10.  G. H. Farrahi, G.H. Majzoobi, Crack behaviour of the aluminium alloy 2024 under fretting conditions, International J. of Engineering, Vol. 15, No. 3A(2002), pp. 287-292

11.  G.H. Majzoobi, G.H. Farrahi, F. Ferdows Farahani, Efficiency of anti-hourglassing approaches in finite element method, International J. of Engineering, Vol. 16, No. 1A(2003), pp. 79-88

12.  G. H. Majzoobi, G. H. Farrahi and A.H. Mahmoodi, A Finite Element Simulation and an Experimental Study of Autofrettage for Strain Hardened Thick-walled Cylinders, J. of Material Science and Engineering A, A359(2003), issue 1-2, pp. 326-331

13.  G. H. Majzoobi, G. H. Farrahi, M. K. Piplezadeh, A. Akbari, Experimental and Finite Element Prediction of Bursting Pressure in Compound Cylinders, International Journal of Pressure Vessels and Piping, 81 (2004) 889-896

14.  G. H. Majzoobi, G.H. Farrahi, S. J. Hardy, M. K. Pipelzadeh & N. Habibi, Experimental Results and Finite Element Predictions of the Effect of Nut Geometry, Washer and Teflon Tape on the Fatigue Life of Bolts, Fatigue and Fracture of Engineering materials & Structures, 28(2005), 557-564

15.  G. H. Majzoobi, G. H. Farrahi, N. Habibi, Experimental evaluation of the effect of thread pitch on fatigue life of bolts, International Journal of Fatigue, 27 (2005) 189-196

16.  G. H. Farrahi, G.H. Majzoobi, H. Chinekesh, An investigation into the effect of contact geometry on fretting fatigue life for aluminium alloy 2024-T3, Indian J. of Engineering and Materials Sciences, 12(2005), 331-336

17.  M. A. Hamed, A. Nosier, G. H. Farrahi, Separation of delamination modes in composite beams with symmetric delaminations, Materials & Design, 27(2006), 900-910

18.  G. H. Farrahi, H. Ghadbeigi, An investigation into the effect of various Surface treatments on fatigue life of a tool steel, J. of Materials Processing Technology, 174(2006), 318-324

19.  G. H. Farrahi, G. H. Majzoobi, F. Hosseinzadeh, S. M. Harati, Experimental evaluation of the effect of residual stress field on crack growth behaviour in C(T) specimen, Journal of Engineering Fracture Mechanics, 73(2006), 1772-1782

20.  G.H. Farrahi, A. Khalaj, Estimation of fatigue damage caused by actual roads and maneuvres on proving ground, International Journal of Achievements in Materials and Manufacturing Engineering, 14(2006) 90-96

21.  G.H. Farrahi, A. Mohajerani, Effect of residual stress on stress intensity factors of fretting fatigue cracks, International J of Microstructure and Materials Properties, vol. 2, no. 2 (2007) 164-177

22.  G. Ghajar, G Rashed, G.H. Farrahi, Multiaxial Stress-Strain Modelling and Effect of Additional Hardening due to Nonproportional Loading, Journal of Mechanical Science and Technology, 21(2007) 1153-1163.

23.  M. Mohammadi, G.H. Farrahi, S. H Hoseini, Bauschinger Effect Investigation of an Aluminium Alloy, and its Application in Autofrettaged and Compound Tubes, ASME, Pressure Vessels and Piping Division (Publication) PVP 6(2008), pp. 629-637

24.  M. Mohammadi, G.H. Farrahi, S. H Hoseini, Material Removal Simulation of Aluminium Compound Tubes with Incorporating Real Unloading Behavior, ASME, Pressure Vessels and Piping Division (Publication) PVP 3(2008), pp. 195-201

25.  M. Mohammadi, G.H. Farrahi, S. H Hoseini, Determination of Residual Stresses in Autofrettaged Compound Tubes for Different Geometries, ASME, Pressure Vessels and Piping Division (Publication) PVP 5(2008), pp.53-61

26.  Mohajerani, G.H. Farrahi, Investigation of the Effect of Pad Geometry on Flat and Rounded Fretting Fatigue, Scientia Iranica, Vol. 15, No. 3 (2008), pp. 333-339

27.  S. H. Hoseini, T. Peirbedaghi, M. Asgari, G.H. Farrahi, M. T. Ahmadian, Nonlinear free Vibration of Conservative oscillators with inertia, Journal of Sound and Vibration, 316(2008), pp.263-273

28.  G. H. Farrahi, E. Hosseinian, A. Assempour, General Variable Material Property Formulation for the Solution of Autofrettaged Thick-Walled Tubes with Constant Axial Strains, J. of Pressure Vessel Technology, ASME, 130(4), 2008, 041209 (7 pages)

29.  G. H. Farrahi, M. Sadighi and A. Esmati, Effect of Residual Stress on Fatigue Life of Rotating Components, Sharif Journal, 51(2), 2009, pp. 77-83 (in Persian)

30.  Majzoobi, G.H., Nemati, J., Novin Rooz, A.J., Farrahi, G.H., Modification of fretting fatigue behavior of AL7075-T6 alloy by the application of titanium coating using IBED technique and shot peening, Tribology International, 42(1), 2009, pp.121-129

31.  T. Peirbedaghi,S. H. Hoseini, M. T. Ahmadian, G.H. Farrahi, Duffing equations with cubic and quintic nonlinearities, Computers and mathematics with Applications, 57(3), 2009, pp. 500-506

32.  G. H. Farrahi, E. Hosseinian, A. Assempour, On the material modelling of the autofrettaged pressure vessel steels, J. of Pressure Vessel Technology, ASME, 131(5), 2009, pp. 051403(6 pages)

33.  E. Hosseinian,G. H. Farrahi, M. R. Movahhedy, An analytical framework for the solution of autofrettaged tubes under constant axial strain condition, J. of Pressure Vessel Technology, ASME, 131(6), 2009, pp. 061201 (8 pages)

34.  Y. Tadi Beni, M. R. Movahhedy, G. H. Farrahi, Rate Dependent Dynamic ALE Analysis of Finite Deformation of Elasto-Viscoplastic Solids, Materials & Design, 30(8), 2009, pp.2995-3005

35.  G.H.Farrahi , M.Sistaninia, Thermal analysis of laser hardening for different moving patterns, International Journal of Engineering, 22(2), 2009, pp.169-180

36.  G.H. Farrahi , S.A. Faghidian and D.J. Smith, An Inverse Approach to Determination of Residual Stresses Induced by Shot Peening, International J. of Mechanical Sciences, 51(9-10), 2009, pp. 726-731

37.  G.H. Farrahi , S.A. Faghidian and D.J. Smith, Reconstruction of Residual Stresses in Autofrettaged Thick-Walled Tubes from Limited Measurements, International Journal of Pressure Vessels and Piping, 86(11), 2009, pp. 777-784

38.  G.H. Farrahi , S.A. Faghidian and D.J. Smith, A New Analytical Approach to Reconstruct Residual Stresses Due to Turning Process, ICAM2009, World Academy of Science Engineering and Technology 55 , 2009, pp. 453-457

39.  G. H. Majzoobi, G. H. Farrahi, and A. Fadaee, Probabilistic analysis of welding residual stress on fatigue crack growth, The Arabian J. for Science and Engineering, 34(1C), 2009, pp. 183-193

40.  B. Haghpanah Jahromi, G.H. Farrahi, M. Maleki, H. Nayeb-Hashemi, A. Vaziri, Residual stresses in autofrettaged vessel made of functionally graded material, Engineering Structures, 31, 2009, pp. 2930-2935

41.  S.H. Hoseini, T. Pirbodaghi, M.T. Ahmadian, G.H. Farrahi, On the large amplitude free vibrations of tapered beams: an analytical approach, Mechanics Research Communications, 36( 8), 2009, pp. 892-897

42.  Y. Tadi Beni, M.R. Movahhedy and G.H. Farrahi, Development and Application of an ALE Large Deformation Formulation, Amirkabir/MISC 2009; 41(1):17:24.

43.  M.H. Kargarnovin, S.A. Faghidian, Y. Farjami, G.H. Farrahi, Application of homotopy-Pade technique in limit analysis of circular plates under arbitrary rotational symmetric loading using von-Mises yield criterion, Commun Nonlinear Sci Numer Simulat, 15(4), 2010, pp. 1080-1091

44.  G. H. Farrahi, G. H. Majzoobi and A. Fadaee, Prediction by Genetic Algorithm and Measurement by Center Hole Drilling of Residual Stresses of MAG weldment, Advanced Materials Research, 83-86, 2010, pp 738-745

45.  M. Maleki, G.H. Farrahi, B. Haghpanah Jahromi, E. Hosseinian, Residual stress analysis of autofrettaged thick-walled spherical pressure vessel, International Journal of Pressure Vessels and Piping 87 (2010) 396-401

46.  Y. Tadi beni, M.R. Movahhedy and G.H. Farrahi, A Complete Treatment of Thermo-Mechanical ALE Analysis; Part I: Formulation. Iranian Journal of Science and Technology, Transaction B: Engineering, 2010; 34(B):135:148.

47.  Y. Tadi beni, M.R. Movahhedy and G.H. Farrahi, A Complete Treatment of Thermo-Mechanical ALE Analysis; Part 2: Finite Element Equations and Applications. Iranian Journal of Science and Technology, Transaction B: Engineering, 2010; 34(B):149-165.

48.  Mohajerani, G.H. Farrahi, Numerical investigation of crack orientation in the fretting fatigue of a flat rounded contact, International Journal of Engineering, 23(3), 2010, pp.223-232

49.  G.H. Farrahi , S.A. Faghidian and D.J. Smith, An Inverse Method for Reconstruction of Residual Stress Field in Welded Plates, J. of Pressure Vessel Technology, ASME, 132, 061205 (2010) (9 pages)

50.  G. H. Farrahi, M. Tirehdast, E. Masoumi K.H., S. Parsa, M. Motakefpoor, Failure Analysis of a gas turbine compressor, Engineering Failure Analysis 18 (2011) 474-484

51.  S. M. H-Gangaraj, Y. Alvandi-Tabrizi, G. H. Farrahi , G. H. Majzoobi, H. Ghadbeigi, Finite element analysis of shot-peening effect on fretting fatigue parameters, Tribology International 44 (2011) 1583-1588

52.  R. Jahedi, G.H. Farrahi, E. Poursaeedi, Stress Relieving of Locally Hardened Rotor Steel, J. of Sharif, 51/2 (2010) 77-83 (in Farsi)

53.  S. M. Hassani-Gangaraj, M. Guagliano, G. H. Farrahi, Finite Element Simulation of Shot Peening Coverage with the Special Attention on Surface Nanocrystallization, Procedia Engineering 10 (2011) 2464-2471

54.  Moridi, M. Azadi, G.H. Farrahi, Coating thickness and roughness effect on stress distribution of A356.0 under thermo-mechanical loadings, Procedia Engineering 10 (2011) 1372-1377

55.  Hassani, M.H. Hojjati, G.H. Farrahi, R.A. Alashti, Semi-exact elastic solutions for thermo-mechanical analysis of functionally graded rotating disks, Composite Structures 93 (2011) 3239-3251

56.  S.M.H. Gangaraj and G.H. Farrahi, Side effects of shot peening on fatigue crack initiation life, International Journal of Engineering, Transactions A: Basics Vol. 24, No. 3, September 2011, pp275-280

57.  G.H. Farrahi, S.M. H-Gangaraj, S. Abolhassani, F. Hemmati, M. Sakhaei, Failure analysis of a four cylinder diesel engine crankshaft made from nodular cast iron, The Journal of Engine Research, Vol. 22 (2011) 21-27

58.  A. Razavi, F. Hafezi and G.H. Farrahi, FEM prediction of welding residual stresses and temperature fields in butt and T-welded joints, Advanced Materials Research Vols. 418-420 (2012) 1486-1493. http://dx.doi.org/10.4028/www.scientific.net/AMR.418-420.1486

59.  N. Habibi, S.M. H-Gangaraj, G.H. Farrahi, G.H. Majzoobi, A.H. Mahmoudi, M. Daghigh, A. Yari, A. Moridi, The effect of shot peening on fatigue life of welded tubular joint in offshore structure, Materials & Design 36 (2012) 250-257. http://dx.doi.org/10.1016/j.matdes.2011.11.024

60.  M. Azadi, A. Moridi, G.H. Farrahi, Optimal experiment design for plasma thermal spray parameters at bending loads, Int. J. Surface Science and Engineering, Vol. 6, Nos. 1/2 (2012), pp.3-14. http://dx.doi.org/ 10.1504/IJSURFSE.2012.046837

61. S.A. Faghidian, D. Goudar, G.H. Farrahi, and D.J. Smith, Measurement, Analysis and Reconstruction of Residual Stresses, Journal of Strain Analysis for Engineering Design, May 2012 47(4): 254-264. http://dx.doi.org/10.1177/0309324712441146

62. G. Z. Voyiadjis, S. H. Hoseini, G. H. Farrahi, Effects of the stress invariants and the reverse loading on the ductile fracture initiation. International Journal of Solids and Structures, 49 (2012) 1541-1556 http://dx.doi.org/10.1016/j.ijsolstr.2012.02.030

63.  A. Hassani, M.H. Hojjati, G. H. Farrahi, R.A. Alashti, Semi-exact solution for thermo-mechanical analysis of functionally graded elastic-strain hardening rotating disks, Commun Nonlinear Sci Numer Simulat, 17(2012) 3747-3762. http://dx.doi.org/10.1016/j.cnsns.2012.01.026

64.  Ghorashi, M., Farrahi, G.H., and Eftekhari, M., Effects of Temperature on Wear Behavior of a Plasma Sprayed Diesel Engine Cylinder, SAE Technical Paper 2012-01-1335, 2012, http://dx.doi.org/10.4271/2012-01-1335.

65.  G. H. Farrahi, George Z. Voyiadjis, S. Hamed Hoseini, E. Hosseinian, Residual Stress Analyses of Re-autofrettaged Thick-walled Tubes, Journal of Pressure Vessels and Piping 98 (2012) 57-64, http://dx.doi.org/10.1016/j.ijpvp.2012.07.007Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: Description: empty

66.  A. Hassani, M.H. Hojjati, E. Mahdavi, R.A. Alashti, G.H. Farrahi, Thermo-mechanical analysis of rotating disks with non-uniform thickness and material properties, International Journal of Pressure Vessels and Piping 98 (2012) 95-101, http://dx.doi.org/10.1016/j.ijpvp.2012.07.010,

67.  G.H. Farrahi, M. Rezvani Rad, M. Azadi, Coating thickness effect on stress distribution of coated cylinder head considering residual stress, The Journal of Engine Research, Vol. 26 (spring 2012), pp. 4957 http://www.engineresearch.ir/browse.php?a_id=287&slc_lang=fa&sid=1&ftxt=1

68.  G.H. Farrahi, M. Ghodrati, M. Azadi, Finite element analysis of thermal and mechanical stresses in diesel engine cylinder head using two-layer elastic-viscoplastic model, The Journal of Engine Research, Vol. 28 (autumn 2012), pp. 51-60 (in Farsi) http://www.engineresearch.ir/browse.php?a_id=340&slc_lang=fa&sid=1&ftxt=1

69.  Abazadeh, B., Chakherlou, T.N., Farrahi, G.H., Alderliesten, R.C., Fatigue life estimation of bolt clamped and interference fitted-bolt clamped double shear lap joints using multiaxial fatigue criteria, Materials & Design, Volume 43, January 2013, Pages 327-336, doi: http://dx.doi.org/10.1016/j.matdes.2012.06.050

70.  G. Z. Voyiadjis, S. H. Hoseini, G. H. Farrahi. A Plasticity Model for Metals with Dependency on all the Stress Invariants. ASME Journal of Engineering Materials and Technology 135 (2013) 011002 (13 pages). http://dx.doi.org/10.1115/1.4007386

71.  E. Masoumi Khalil Abad, G. H. Farrahi, M. Masoumi Khalil Abad, A. A. Zare, S. Parsa, Failure Analysis of a Gas Turbine Compressor in a Thermal Power Plant, J Fail. Anal. and Preven. http://dx.doi.org/10.1007/s11668-013-9663-8

72.  S. A. Faghidian, G. H. Farrahi, D. J. Smith, An Analytical Solution for Inverse Determination of Residual Stress Field, Journal of Solid Mechanics Vol. 4, No. 2 (2012) pp. 114-127

73.  M. Azadi, M. Baloo, G. H. Farrahi, S. M. Mirsalim, A review of thermal barrier coating effects on diesel engine performance and components lifetime, International Journal of Automotive Engineering Vol. 3, No. 1( 2013) 305-17, http://www.iust.ac.ir/ijae/browse.php?a_id=177&slc_lang=en

74.  G.H. Farrahi, G.H. Majzoobi, A.H. Mahmoudi, N. Habibi, Fatigue life of repaired welded tubular joints, International J. of Engineering A Vol. 26, No. 1, (January 2013) 25-31. http://dx.doi.org/10.5829/idosi.ije.2013.26.01a.04,

75.  G. H. Farrahi, G. Z. Voyiadjis, S. H. Hoseini, E. Hosseinian. Residual Stress Analysis of the Autofrettaged Thick-walled tube using Nonlinear Kinematic Hardening. ASME Journal of Pressure Vessel Technology   http://dx.doi.org/10.1115/1.4007472

76.  M. Azadi, G.H. Farrahi, G. Winter, W. Eichlseder, Experimental fatigue lifetime of coated and uncoated aluminum alloy under isothermal and thermo-mechanical loadings, Ceramics International, 39(2013)9099-9107, http://dx.doi.org/10.1016/j.ceramint.2013.05.006

77.  M. Azadi, G.H. Farrahi, G. Winter, W. Eichlseder, The effect of various parameters on out-of-phase thermo-mechanical fatigue lifetime of A356.0 cast aluminum alloy, International J. of Engineering, Volume 26 , Number 12 , December  2013, 1459-1468, http://dx.doi.org/10.5829/idosi.ije.2013.26.12c.06

78.  G.H. Farrahi, M. Azadi, G. Winter, W. Eichlseder, A new energy-based isothermal and thermo-mechanical fatigue lifetime prediction model for aluminum-silicon-magnesium alloy, Fatigue and Fracture of Engineering materials & Structures, volume 36(12), December 2013, pages 1323-1335, http://dx.doi.org/10.1111/ffe.12078

79.  M. Azadi, G.H. Farrahi, A. Moridi, Optimization of air plasma sprayed thermal barrier coating parameters in diesel engine applications, Journal of Materials Engineering and Performance, Volume 22(11) November 2013, pages 3530-3538 , http://dx.doi.org/10.1007/s11665-013-0629-5

80.  M. Mokhtari Shirazabad, M. Azadi, G.H. Farrahi, G. Winter, W. Eichlseder, Improvement of high temperature fatigue lifetime in AZ91 magnesium alloy by heat treatment, Materials Science & Engineering A, Vol. 588, 20 December 2013, Pages 357-365, http://dx.doi.org/10.1016/j.msea.2013.09.067

81.  G.H. Farrahi, A. Shamloo, M. Felfeli, M. Azadi, Numerical simulations of cyclic behaviors in light alloys under isothermal and thermo-mechanical fatigue loadings, Materials & Design, Vol. 56, April 2014, Pages 245-253, http://dx.doi.org/10.1016/j.matdes.2013.11.007

82.  S.M., Salehi, Farrahi, G.H, Sohrabpoor, S.M, Masoudi Nejad, R., Life Estimation in the Railway Wheels Under the Influence of Residual Stress Field, International Journal of Railway Research 1(1), 2014, pages 61-72.

83.  M. Azadi, G. H. Farrahi, G. Winter, W. Eichlseder, Fatigue lifetime of AZ91 magnesium alloy subjected to cyclic thermal and mechanical loadings, Materials & Design, Vol. 53, January 2014, Pages 639-644, http://dx.doi.org/10.1016/j.matdes.2013.07.075

84.  K. Sherafatnia, M.H. Kahrobaiyan, G.H. Farrahi, Size-dependent energy release rate formulation of notched beams based on a modified couple stress theory, Engineering Fracture Mechanics, Vol. 116, January 2014, Pages 80-91, http://dx.doi.org/10.1016/j.engfracmech.2013.12.001

85.  K. Sherafatnia, G.H. Farrahi, S.A. Faghidian, Analytic Approach to Free Vibration and Buckling Analysis of Functionally Graded Beams with Edge Cracks using four Engineering Beam Theories, International J. of Engineering Transactions C, Vol. 27 , Number 6 , June  2014, pages 979-990, http://www.ije.ir/Vol27/No6/C/17.pdf

86.  Moridi, M. Azadi and G.H. Farrahi, Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects, Surface and Coatings Technology, 243 (2014) 91-99,  http://dx.doi.org/10.1016/j.surfcoat.2012.02.019

87.  S. M. H. Gangaraj, M. Guagliano, G. H. Farrahi, An approach to relate shot peening finite element simulation to the actual coverage, Surface and Coatings Technology, 243 (2014) 39-45, http://dx.doi.org/10.1016/j.surfcoat.2012.03.057

88.  R. Saljooghi, M. T. Ahmadian, G. H. Farrahi, Vibration and buckling analysis of functionally graded beams using reproducing kernel particle method, Scientia Iranica, Transaction on Mechanical Engineering, No.6, Vol. 21 (2014), http://www.scientiairanica.com/en/ManuscriptDetail?mid=306

89.  M. Azadi, G. H. Farrahi, G. Winter, W. Eichlsede, Thermo-mechanical behaviours of light alloys in comparison to high temperature isothermal behaviours, Materials at High Temperatures, 2014, Vol 31, no.1, pp 12-17, http://dx.doi.org/10.1179/0960340913Z.0000000002

90.  G.H. Farrahi, M. Ghodrati, M. Azadi, M. Rezvani Rad, Stress-strain time-dependent behavior of A356.0 aluminium alloy subjected to cyclic thermal and mechanical loadings, Mechanics of Time-Dependent Materials, issue 3, vol. 18(2014), 475-491, http://dx.doi.org/10.1007/s11043-014-9238-4

91.  M. Azadi, M. Ghodrati, G.H. Farrahi, Experimental and numerical evaluations of stress relaxation in A356 aluminium alloy subjected to out-of-phase thermomechanical cyclic loadings, Materials at High Temperatures, No. 3 Vol. 31 (2014), 204-210, http://dx.doi.org/10.1179/1878641314Y.0000000015

92.  M. Rezvani Rad, G.H. Farrahi, M. Azadi, M. Ghodrati, Effects of preheating temperature and cooling rate on two-step residual stress in thermal barrier coatings considering real roughness and porosity effect, Ceramics International, Vol. 40, Issue 10, Part A, (2014), 15925–15940, http://dx.doi.org/10.1016/j.ceramint.2014.07.121

93.  M. Rezvani Rad, G.H. Farrahi, M. Azadi, M. Ghodrati, Stress analysis of thermal barrier coating system subjected to Out-of-phase thermo-mechanical loadings considering roughness and porosity effect, Surface and Coating Technology, 262(2015) 77-86,  http://dx.doi.org/10.1016/j.surfcoat.2014.12.016

94.  M. Felfeli, M. Azadi, G. H. Farrahi, Constitutive modeling of elastic-viscoplastic behaviors in aluminum alloys subjected to cyclic loadings at various strain rates, J Strain Analysis for Engineering Design, IMechE, 50(2015), 103-124, http://dx.doi.org/10.1177/0309324714557850

95.  M. Azadi, G. H. Farrahi, G. Winter, P. Huter, W. Eichlseder, Damage prediction for un-coated and coated aluminum alloys under thermal and mechanical fatigue loadings based on a modified plastic strain energy approach, Materials & Design, Vol. 66, Part B, 5 February (2015), 587-595, http://dx.doi.org/10.1016/j.matdes.2014.04.022

96.  M. Azadi , G. Winter, G. H. Farrahi, W. Eichlseder, Comparison Between Isothermal and Non-Isothermal Fatigue Behavior in a Cast Aluminum-Silicon-Magnesium Alloy, Strength of Materials, November 2015, Volume 47, Issue 6, pp 840-848; http://dx.doi.org/10.1007/s11223-015-9721-4

97.  M. Chamani , G.H. Farrahi, M.R. Movahhedy, Molecular dynamics simulation of nanoindentation of nanocrystalline Al/Ni multilayers, Computational Materials Science, Vol. 112, Part A,1 February 2016, 175-184. http://dx.doi.org/10.1016/j.commatsci.2015.10.022

98.  A.H. Mahmoudi, A. Ghasemi, G.H. Farrahi and K. Sherafatnia, A Comprehensive Experimental and Numerical Study on Redistribution of Residual Stresses by Shot Peening, Materials & Design, Volume 90, 15 January 2016, Pages 478-487, http://dx.doi.org/10.1016/j.matdes.2015.10.162

99.  K. Sherafatnia, G.H. Farrahi, A.H. Mahmoudi, A. Ghasemi, Experimental measurement and analytical determination of shot peening residual stresses considering friction and real unloading behavior, Materials Science & Engineering A, Volume 657, 7 March 2016, Pages 309–321. http://dx.doi.org/10.1016/j.msea.2016.01.070

100.                  A. Ghasemi, S. M. Hassani-Gangaraj, A. H. Mahmoudi, G. H. Farrahi and M. Guagliano, Shot peening coverage effect on residual stress profile by FE random impact analysis, Surface Engineering, vol. 32 issue 11 (2016) 861-870, https://doi.org/10.1080/02670844.2016.1192336

101.                  Erfan Maleki, Khalil Sherafatnia  and G.H. Farrahi, Size dependent energy release rate of notched FGM beams based on a modified couple stress theory, Materials Today: Proceedings vol. 3, issue 8 (2016) 2662–2671

102.                  M. Azadi, G. H. Farrahi, Failure mechanisms investigation in thermal barrier coatings under isothermal and non-isothermal fatigue loadings using design of experiments, J. of Simulation and Analysis of Novel Technologies in Mechanical Engineering (J. of Solid Mechanics in Engineering), Fall 2016, Vol. 9 (3), pp. 517-530, http://jsme.iaukhsh.ac.ir/article_528828.html

103.                  S.M. Salehi, G.H. Farrahi, S. Sohrabpoor, An optimal wheel wear maintenance technique in railways including sharp curves based on an empirical study, Chinese Journal of Mechanical Engineering, accepted for publication

104.                  S.M. Salehi, G.H. Farrahi, S. Sohrabpoor, A new technique of “first and second limits” for wagon maintenance in railway tracks consisting of sharp curves based on the empirical study of wheel wear, Scientia Iranica B (2017) 24(3), 1171-1180

105.                  E. Maleki, G.H. Farrahi, K. Sherafatnia,  Application of Artificial Neural Network to Predict the Effects of Severe Shot Peening on Properties of Low Carbon Steel, Machining, Joining and Modifications of Advanced Materials, Advanced Structured Materials 61, 45-60,  https://doi.org/10.1007/978-981-10-1082-8_5

106.                  M. Chamani, G.H. Farrahi, M.R. Movahhedy, Friction behavior of nanocrystalline nickel near the Hall-Petch breakdown, Tribology International, Volume 107, March 2017, Pages 18–24, https://doi.org/10.1016/j.triboint.2016.11.020

107.                  Amir Nourani, Saeed Akbari, G.H. Farrahi, Jan K. Spelt, Strain-rate dependent influence of adherend stiffness on fracture load prediction of BGA solder joints, Engineering Fracture Mechanics, Volume 186, December 2017, Pages 119-133, https://doi.org/10.1016/j.engfracmech.2017.09.027

108.                  K. Reza Kashyzadeh, G.H. Farrahi, M. Shariyat, M. T. Ahmadian, Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle, International J. of Engineering: B, Vol. 30, No. 11 (November 2017),1776-1783, http://www.ije.ir/Vol30/No11/B/20.pdf

109.                  Erfan Maleki, G.H. Farrahi, Modeling of conventional and severe shot peening influence on properties of high carbon steel via artificial neural network, International J. of Engineering: B, Vol. 31, No, 2 (February 2018), 382-393, http://www.ije.ir/Vol31/No2/B/24.pdf

110.                  A.H. Mahmoudi, M. Niknam, G.H. Farrahi, A. Ghasemi, R. Seifi, Experimental and numerical investigation of the effect of sever shot peening on fatigue life of aluminium alloy A356.0, Sharif Mechanical Engineering, vol. 33-3(2), Autumn 2017, 133-140 (in Persian)

111.                  K. Sherafatnia, G.H. Farrahi, A.H. Mahmoudi, Effect of initial surface treatment on shot peening residual stress field: Analytical approach with experimental verification, International Journal of Mechanical Sciences, Vol. 137, March 2018, Pages 171-181, https://doi.org/10.1016/j.ijmecsci.2018.01.022

112.                  K. Reza Kashyzadeh, G.H. Farrahi, M. Shariyat, M.T. Ahmadian, The role of wheel alignment over the fatigue damage accumulation in vehicle steering knuckle, Journal of Stress Analysis, Vol. 3, issue 1(2018), 21-33, http://dx.doi.org/10.22084/jrstan.2018.15722.1042

113.                  S.M. Salehi, G. H. Farrahi, S. Sohrabpoor, A Study on the Contact Ellipse and the Contact Pressure during the Wheel Wear through Passing the Tracks including Several Sharp Curves, International J. of Engineering: B, Vol. 31, No. 5 (May 2018), 826-833

114.                  K. Reza Kashyzadeh, G.H. Farrahi, M. Shariyat, M.T. Ahmadian, Experimental accuracy assessment of various high-cycle fatigue criteria for a critical component with a complicated geometry and multi-input random non-proportional 3D stress components, Engineering Failure Analysis, 90 (2018), 534-553, https://doi.org/10.1016/j.engfailanal.2018.03.033

115.                  G.H. Farrahi, M. Javanbakht, H. Jafarzadeh, On the Phase Field Modeling of Crack Growth and Analytical Treatment on the Parameters, Continuum Mechanics and Thermodynamics, Online June 2018, https://doi.org/10.1007/s00161-018-0685-z

116.                  G.H. Farrahi, M. Chamani, K. Reza Kashyzadeh, A. Mostafazade, A.H. Mahmoudi, H. Afshin, Failure analysis of bolt connections in fired heater of a petrochemical unit, Engineering Failure Analysis, Vol. 92, October 2018, Pages 327–342, https://doi.org/10.1016/j.engfailanal.2018.06.004

117.                  S.M. Salehi, G. H. Farrahi, S. Sohrabpoor, Dynamic Behavior of Worn Wheels in a Track Containing Several Sharp Curves Based on Field Data Measurements and Simulation, Scientia Iranica, Article in Press

118.                  V. I. Levitas, H. Jafarzadeh, G. H. Farrahi, M. Javanbakht, Thermodynamically Consistent and Scale-Dependent Phase Field Approach for Crack Propagation Allowing for Surface Stresses, International Journal of Plasticity, Article in Press, https://doi.org/10.1016/j.ijplas.2018.07.005

119.                  A. Vojdani, G. H. Farrahi, A. Mehmanparast, B. Wang, Probabilistic Assessment of Creep-Fatigue Crack Propagation in Austenitic Stainless Steel Cracked Plates, Engineering Fracture Mechanics, 200 (2018) pp. 50-63, https://doi.org/10.1016/j.engfracmech.2018.07.022

120.                  Amir Nourani, Sadegh Mirmehdi, Gholam Hossein Farrahi, and Farid soroosh, Predicting fracture of solder joints with different constraint factors, Fatigue and Fracture of Engineering materials & Structures, Vol. 42, Issue2, (2019), pp. 425-438,  http://dx.doi.org/10.1111/ffe.12920

121.                  K. Minaii, G.H. Farrahi, M. Karimpour, H. Bahai, G.H. Majzoobi, Investigation of microstructure effect on fretting fatigue crack initiation using crystal plasticity, Fatigue & Fracture of Engineering Materials & Structures,  Vol. 42, Issue3 (2019) pp. 640-650. https://doi.org/10.1111/ffe.12939

122.                  G.H. Farrahi, K. Minaii, M. Chamani, A.H. Mahmoudi, Effect of residual stress on failure of tube-to-tubesheet weld in heat exchangers, IJE TRANSACTIONS A, Vol. 32 , Number 1 ( 2019), 112-120

123.                  S. Mirmehdi; G.H. Farrahi; A. Nourani; F. Soroosh, Predicting crack initiation of solder joints with varying sizes under bending, Journal of Electronic Materials (2019), Article in Press, https://doi.org/10.1007/s11664-019-06989-y

124.                  H. Jafarzadeh, G.H. Farrahi, M. Javanbakht, Phase field modeling of crack growth with double-well potential including surface effects, Continuum Mechanics and Thermodynamics, online published, https://doi.org/10.1007/s00161-019-00775-1

125.                  M.S. Ghorashi, G.H. Farrahi, M.R. Movahhedy, Considering Cyclic Plasticity to Predict Residual Stresses in Laser Cladding of Inconel 718 Multi Bead Samples, Journal of Manufacturing Processes, accepted for publication

126.                   

 

 

Refereed Conference Proceedings:

1.     Farrahi G H and Lebrun J L, Optimisation du grenaille d'acier a ressort a partir des parametres contraintes residuelles et tenue a la fatigue, Proc. Conf. of the Groupement francais pour l'analyse des contraintes par diffraction X, (1982), Besancon, France

2.     Farrahi G H and Lebrun J L, Application de la diffraction X a la caracterisation des couches superficielles endommagees par microglissement alterne (fretting), Proc. Conf. of the Groupement francais pour l'analyse des contraintes par diffraction X, (1984), Aix-en-provence, France

3.     Farrahi G H, Fretting wear and fretting fatigue, in Surface Metallurgy and Tribology, Eds: M. Salehi and F.Ashrafizadeh, ISSST, (1994), pp 165-183

4.     Farrahi G H , Majzoubi G H,  Study of freeting fatigue crack behaviour of an aluminium alloy  Proceeding of Third Conference of Mechanical Engineering, Vol. 2, ISME, (1995), pp.1145-1156

5.     Majzoubi G H, Farrahi G H ,  Numerical simulation of deformation and ducticle fracture of materials under high strain rate loading, Proceeding of Third Conference of Mechanical Engineering, Vol. 2, ISME, (1995), pp. 1165-1173

6.     Farrahi G H, Mechanical characterisation of surface layers by X-ray diffraction-application to tribology, ACXRI '96, (1996), Ipoh, Malaysia, pp. 116-121

7.     Farrahi G H, Shot peening and its application in car industry, Proceeding of Third national seminar of Surface Engineering, ISSST, (1999), pp.37-46 (in Persian)

8.     Smith D J, Farrahi G H, Zhu W X and McMahon C A, Influence of material processing on fatigue life of forged components, Proceeding of 4th Int. Conf. of Iranian Soc. of Mec. Eng., ISME2000, 16-19 May 2000, Tehran,Iran, (2000), pp.83-89

9.     Farrahi G H, Sadeghimehr M and Nouri A., Fretting fatigue of aeronautical materials, Proceeding of First Int. Conf. In Aerospace Eng., AERO 2000, Tehran,Iran, (2000) , pp. 1103-1111 (in Persian)

10.  G.H. Majzoobi, G.H. Farrahi, A. Akbari, Bursting Pressure Prediction in Compound Cylinders, Proceedings, 9th Annual (International) Mechanical Engineering Conference (ISME2001), Rasht, 2001 pp.383-390. (in Persian)

11.  G.H. Majzoobi, G.H. Farrahi, F. Ferdows Farahani, Study of anti-hourglassing efficiency in finite element method, , Proceedings, 9th Annual (International) Mechanical Engineering Conference (ISME2001), Rasht, 2001 pp.673-681. (in Persian)

12.  D. J. Smith, G. H. Farrahi, W. X. Zhu and C. A. McMahon, Probabilistic Analysis of Fatigue Life of Hot Forged Steel Components, Proceeding 10th Conf. ISME(2002), Tehran, 2002, pp. 574-580

13.  Shamsaei N, Farrahi G H, Finding Stress Time Spectrum and Determination of Probability Density Function of a vehicle part by Simulation of a Short Distance Road, Proceeding 10th Conf. ISME(2002), Tehran, 2002, pp. 281-290 (in Persian)

14.  G.H. Farrahi, A. Khalaj, Estimation of fatigue damage caused on automotive components by actual roads and maneuvers on proving ground using Msc/Nastran and Adams packages, Proceeding 10th Conf. ISME(2002), Tehran, 2002, 273-280 (in Persian)

15.  D. J. Smith, G. H. Farrahi, W. X. Zhu, Plasticity effect in the hole-drilling residual stress measurement, 10th ISME Conference (2002), 286-291

16.  G. H. Farrahi, R. Chopanijouybari, M. Fardi, Dimensional accuracy analysis of cold indirect extruded components, Proceeding of 5th Conference of Manufaturing, Tehran, 2002, 579-590 (in Persian)

17.  Farrahi, G.H., Ohadi, A.R. and Abbasi, M.R., Investigating the Effect of Strain Rate on Dynamical Buckling Behavior of Thin Structures Under Impact Loads, Proceedings, 11th Annual (International) Mechanical Engineering Conference (ISME2003), Mashhad, May 13-15, 2003 (in Persian)pp.1014-1022.

18.  Shamsaei N, Farrahi G H, Reliability Analysis of a Vehicle Part Under Random Fatigue Loading, 11th Annual (International) Mechanical Engineering Conference (ISME2003), Mashhad, May 13-15, 2003, pp.1136-1144. (in Persian)

19.  R. Chopanijouybari, G. H. Farrahi, M. Fardi, The effect of important parameters on dimensional accuracy analysis of cold impact extruded components, Proceeding of 11th Annual (International) Mechanical Engineering Conference (ISME2003), Mashhad, 2003, 524-531 (in Persian)

20.  G. H. Farrahi, Abedi, Impact simulation using spherical elements method, 11th Annual (International) Mechanical Engineering Conference (ISME2003), Mashhad, May 13-15, 2003, 885-893. (in Persian)

21.  G.H. Farrahi, A. Sadighi, Failure analysis of a notched shaft under multiaxial loading by FE method, Proceeding of 12th Annual (International) Mechanical Engineering Conference (ISME2004), Tehran, 2004 (in Persian)

22.  G.H. Farrahi, R. Naghdabadi, R. Moslemi, Residual stress determination using elaso-plastic VMP model and hole-drilling method, Proceeding of 11th Annual (International) Mechanical Engineering Conference (ISME2004), Tehran, 2004 (in Persian)

23.  G. H. Farrahi, M. Sadeghimehr, M. Harati, F. Hosseinzadeh, Numerical analysis of residual stresses introduced by shot peening: Effect of shot speed and size and the hardness of workpiece, Proceeding of 11th Annual (International) Mechanical Engineering Conference (ISME2004), Tehran, 2004 (in Persian)

24.  G. H. Farrahi, M. Karimi, Reliability analysis of tubular joints off shore platforms based on fatigue cracks growth, Proceeding of 6th conference of marine industries, Iranian Assoc. of Naval Architecture & Marine Engineering , Bandar abbas, 2004, pp. 491-501 (in Persian)

25.  G. H. Farrahi, H. Ghadbeigi, Fatigue strength of shot peened steel CK45, Proceeding of 13th Annual (International) Mechanical Engineering Conference (ISME2005), Isfahan, 2005 (in Persian) 

26.  J. Seidi, M. Sadeghimehr, G. H. Farrahi, Determination of fracture mechanics parameters of bovine Cortical Bone, Proceeding of 13th Annual (International) Mechanical Engineering Conference (ISME2005), Isfahan, 2005 (in Persian)

27.  Shamsaei N, Farrahi G H, Danesh Sararoudi, Considering uncertainty of critical value of cumulative damage in fatigue mean-life reliability, International Conf. on Recent Advances in Mechanical & Materials Engineering (ICRAMME2005), Malaysia

28.  Shamsaei N, Farrahi G H, Danesh Sararoudi, Applying material uncertainty in fatigue reliability model of vehicle components, McMat 2005, ASME Conf. on Mechanics and Materials

29.  G.H. Farrahi, A. Khalaj, Estimation of fatigue damage caused by actual roads and maneuvers on proving ground,11th International Scientific Conference on Contemporary Achievements in Mechanics, (CAM3S), Gliwice, Poland, 2005

30.  G.H. Farrahi, A. Mohajerani, Effect of residual stress on stress intensity factors of fretting fatigue cracks 11th International Scientific Conference on Contemporary Achievements in Mechanics, (CAM3S), Gliwice, Poland, 2005

31.  G. H. Majzoobi, A.J. Novinrooz, J. Nemati, G. H. Farrahi, An experimental study of the effect of titanium coating on fretting fatigue behaviour of aluminum alloy 7075-T6 using magnetron sputtering, Proceeding of AMPT 2006, July 2006, Las Vegas, USA

32.  G. H. Majzoobi, J. Nemati, A.J. Novinrooz, G. H. Farrahi, Modification of fretting fatigue behaviour of AL7075-T6 alloy by application of titanium coating and shot peening, Proceeding of AMPT 2006, July 2006, Las Vegas, USA

33.  S. H Hoseini, M. Mohammadi, G.H. Farrahi, A. Asempour, Material Removal Simulation of Autofrettaged Compound Tubes, ISME2007_15th Annual-International Conference on Mechanical Engineering, May 2007, Amir kabir University of Technology, Iran

34.  Y. Tadi, M. Mohammadi, G.H. Farrahi, Fully coupled Implicit dynamic ALE formulation and application in solid mechanic, ISME2007_15th Annual-International Conference on Mechanical Engineering, May 2007, Amir kabir University of Technology, Iran

35.  G.H. Farrahi, E. Hosseinian, Stress Analysis in thick-walled tubes using a model incorporating true behaviour of high strength steel, ISME2007_15th Annual-International Conference on Mechanical Engineering, May 2007, Amir kabir University of Technology, Iran (in Persian)

36.  G.H. Farrahi, A, Hosseinian, A. Assempour, On the material modelling of the Autofrettaged pressure vessel steels, ASME/PVP2008 Pressure Vessel and Piping Conference, July 2008, Chicago, USA

37.  E. Hosseinian, G.H. Farrahi, M. R. Movahedi, AN Analytical Framework For The Solution of Autofrettaged, ASME/PVP2008 Pressure Vessel and Piping Conference, July 2008, Chicago, USA

38.  G.H. Farrahi, M. Sistaninia, H Moeanadini, Finite element simulation of residual stresses in laser heating, The 7th Iranian Aerospace Society Conference, February 2008, Sharif University of Technology, Iran

39.  G.H. Farrahi, M. Sistaninia, H. Moeinadiny, Thermal Modelling of Laser Forming, The 7th Iranian Aerospace Society Conference, February 2008, Sharif University of Technology, Iran (in Persian)

40.  G.H. Farrahi, A successful story in the introduction of cooperative programs in engineering education in Iran, International Technology, Education and Development Conference (INTED2008), March 2008, Valencia, Spain

41.  Me. Sistaninia, G.H. Farrahi, and Ma. Sistaninia, Laser Surface Hardening Considering Coupled Thermoelasticity using an Eulerian Formulations, Proceedings of World Academy of Science, Engineering and Technology (PWASET) Vol. 33 September 2008, pp. 610-616

42.  G. H. Farrahi, G. H. Majzoobi and A. Fadaee, Influence of residual stress on fatigue life of St-37 butt-MAG weldment, Steel Research Int. 79(2008), Special Edition Metal Forming Conference 2008, Vol. 2, pp. 280-287

43.  G.H. Majzoobi, J. Novin Rooz, J. Nemati, G.H. Farrahi, Effects of Chromium and Titanium Coating on Fretting Fatigue Resistance of Aluminum Alloy 7075-T6 Using Magneto-Sputtering Technique and Shot-Peening, Steel Research Int. 79(2008), Special Edition Metal Forming Conference 2008, Vol. 2, pp. 145-152

44.  G. H. Farrahi, G. H. Majzoobi and A. Fadaee,Prediction by Genetic Algorithm and Measurement by Center Hole Drilling of Residual Stresses of MAG weldment, Advances in Materials and Processing Technologies (AMPT2008) 2-5 Nov. 2008, Bahrain

45.  G. H. Majzoobi, G. H. Farrahi, and A. Fadaee, Probabilistic analysis of welding residual stress on fatigue crack growth, Advances in Materials and Processing Technologies (AMPT2008) 2-5 Nov. 2008, Bahrain

46.  G. H. Farrahi, M. Maleki, Residual stress analysis of an autofrettaged compound spherical pressure vessel considering actual material behavior, 4th National Conference of Metals and Materials Forming, MATFORM87, Sharif University of Technology 3-4 Dec. 2008 - Tehran, Iran (in Persian)

47.  G. H. Farrahi, B. Haghpanah, A. Assempour, Elastoplastic stress analysis of functionally graded thick-walled pressurized cylindrical vessels, 4th National Conference of Metals and Materials Forming, MATFORM87, Sharif University of Technology 3-4 Dec. 2008 - Tehran, Iran (in Persian)

48.  G. H. Farrahi, R. Jahedi, On the determination of heating rate effect on rotor steel hardness increasing by using FEM analysis on hardness-residual stress relation, 4th National Conference of Metals and Materials Forming, MATFORM87, Sharif University of Technology 3-4 Dec. 2008 - Tehran, Iran (in Persian)

49.  Y. Tadi Beni, M.R. Movahhedy, G.H. Farrahi, Application of thermo mechanical ALE finite element method in large deformation analysis, 4th National Conference of Metals and Materials Forming, MATFORM87, Sharif University of Technology 3-4 Dec. 2008 - Tehran, Iran (in Persian)

50.  Y. Tadi beni, M.R. Movahhedy and G.H. Farrahi, Development of an ALE finite element method for finite deformation of elasto-viscoplastic solids, ICTAM, 25-29 August 2008, Adelaide, Australia.

51.  S. A. Faghidian, G. H. Farrahi, D. J. Smith, Prediction of Residual Stress Field in Autofrettaged Thick-Walled Tubes Using Limited Measurements, 17th. Annual (International) Conference on Mechanical Engineering-ISME2009,May, 2009, University of Tehran, Iran

52.  Y. Tadi beni, M.R. Movahhedy and G.H. Farrahi, An ALE finite element procedure for finite deformation of elasto-viscoplastic solids. 17th. Annual (International) Conference on Mechanical Engineering-ISME2009.

53.  B.H. Jahromi, G. H. Farrahi, A. Ajdari, H. Nayeb-Hashemi, A. Vaziri, Variable materials property method for functionally graded materials, USNCCM X, Columbus, OH 2009.

54.  F. Hafezi, A. Razavi, G.H. Farrahi, Numerical Analysis and prediction of welding temperature and residual stress distribution of T-joint and but-weld by 3D- FEM model, 10th Iranian Conference of Manufacturing Engineering (ICME 2010), 1-3 March 2010, Babol (in Farsi)

55.  S. M. H-Gangaraj, Y. Alvandi-Tabrizi, G. H. Farrahi , G. H. Majzoobi, H. Ghadbeigi, Finite element analysis of shot-peening effect on fretting fatigue parameters, 6th International Symposium on Fretting Fatigue, Chengdu, China, April 19-21, 2010

56.  G.H. Majzoobi, M. Soori, G.H. Farrahi, The effect of temperature on fretting fatigue behavior of Al7075-T6, 6th International Symposium on Fretting Fatigue, Chengdu, China, April 19-21, 2010

57.  G.H. Farrahi, S.M. H-Gangraj, Side Effects Of Shot Peening On Fatigue Life, The 18th Annual International Conference on Mechanical Engineering, ISME2010, 11-13 May 2010, Sharif University of Technology, Tehran, Iran (in Farsi)

58.  S. M. H-Gangaraj, G. H. Farrahi and A. Kiani, Residual Stress and Damage Tolerance Analysis of Single and Multi-Pass Ground Components, 8th European Conference on Residual Stresses (ECRS8), Riva del Garda (TN), Italy, June 26-28, 2010

59.  S. M. H-Gangaraj, G. H. Farrahi and H. Ghadbeigi, On The Temperature and Residual Stress Field in Grinding, Proceedings of the World Congress on Engineering 2010 2, WCE 2010, pp1196-1200

60.  Yari Borojeni, N. Habibi, G.H. Farrahi, M. Daghigh, G.H. Majzoobi, Effect of influencing parameters on fatigue life of offshore structures, 12th conference of marine industries (MIC2010) , Ziba kenar, 19-21 October 2010 (in Persian)

61.  N. Habibi, G.H. Farrahi, G.H. Majzoobi, A. Yari, M. Daghigh, Experimental study of shot peening effect on fatigue life of tubular joints of offshore structure, the 4th biennial Offshore Industries Conference (OIC2011), 16-17 May 2011, Sharif University of Technology (in Farsi)

62.  N. Habibi, G.H. Farrahi, G.H. Majzoobi, M. Daghigh, Experimental study of fatigue life of repaired tubular joints of offshore structure, the 4th biennial Offshore Industries Conference (OIC2011), 16-17 May 2011, Sharif University of Technology (in Farsi)

63.  Moridi, N. Habibi, G.H. Farrahi, G.H. Majzoobi, M. Daghigh, A. Yari, Design and manufacturing of a fixture for fatigue testing of tubular joints of offshore structure, the 4th biennial Offshore Industries Conference (OIC2011), 16-17 May 2011, Sharif University of Technology (in Farsi)

64.  H. Norouznejad, S. Sabzeali, G.H. Farrahi, Residual stress of torsion bar resulted from induction hardening, 19th Annual Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, The University of Birjand, Birjand, Iran (in Farsi)

65.  N. Habibi, S.M.H. Gangaraj, G.H. Farrahi, G.H. Majzoobi, A.H. Mahmoudi, Experimental and numerical investigation of welding residual stresses in tubular joints, 19th Annual Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, The University of Birjand, Birjand, Iran (in Farsi)

66.  A.Moridi, M.Azadi, G.H. Farrahi, Optimization of constitutive cyclic plasticity model by genetic algorithm, 19th Annual Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, The University of Birjand, Birjand, Iran

67.  H. Norouznejad, G.H. Farrahi, Numerical simulation of induction hardening of torsion bar, Proceedings of The World Congress on Engineering 2011 3, WCE2011, pp2080-2083

68. Moridi, M. Azadi, G.H. Farrahi, Numerical simulation of thermal barrier coating system under thermo-mechanical loadings, Proceedings of The World Congress on Engineering 2011 3, WCE2011, pp1959-1964

69. G.H. Farrahi, M. Azadi, G. Winter and W. Eichlseder, Thermo-mechanical and low cycle fatigue behavior of aluminum alloy cylinder heads, The International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012), March 6-7, 2012, Tehran, Iran

70.  G.H. Farrahi, G.H. Majzoobi, A.H. Mahmoudi, N. Habibi, Fatigue Analysis of Repaired Welded joint of Offshore Platform, Keynote lecture at The International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012), March 6-7, 2012, Tehran, Iran

71.  Mohammad Azadi, G.H. Farrahi, Partik Huter and Gerhard Winter, Thermo-mechanical and high temperature low cycle fatigue analysis of aluminum alloy based on Sehitoglu's model, 20th Annual International Iranian Mechanical Engineering Conference (ISME2012), page 79, Shiraz University, Shiraz, Iran, May 2012, (in Persian)

72.  V. Kazerani, M. Ghorashi, G.H. Farrahi, Design and manufacturing of a test rig to simulate wear of Diesel engine cylinder and ring, 20th Annual International Iranian Mechanical Engineering Conference (ISME2012), Shiraz University, Shiraz, Iran, May 2012, (in Persian)

73.  S.M. Salehi, G.H. Farrahi, Stress analysis of worn wheel based on Hertz theory, 20th Annual International Iranian Mechanical Engineering Conference (ISME2012), Shiraz University, Shiraz, Iran, May 2012, (in Persian)

74.  A. Moridi, M. Azadi, G. Winter, G. H. Farrahi, W.Eichlseder: Modeling of high temperature cyclic behavior in aluminum alloy under thermo-mechanical and isothermal fatigue condition, 3rd Fatigue Symposium Leoben, 18th - 19th April 2012, Leoben, Austria

75.  M. Azadi, G. Winter, G. H. Farrahi, W. Eichlseder: Cyclic behavior of a cast magnesium alloy under low cycle and thermo-mechanical fatigue, 3rd Fatigue Symposium Leoben, 18th - 19th April 2012, Leoben, Austria

76.  G.H. Farrahi, G.H. Majzoobi, A.H. Mahmoudi and N. Habibi, Fatigue Life of Shot Peened Welded Tubular Joint, Proceedings of the World Congress on Engineering 2012 Vol 3, WCE 2012, pp. 2038-41, http://www.iaeng.org/publication/WCE2012/WCE2012_pp2038-2041.pdf

77.  M. Azadi and G.H. Farrahi, Study of failure mechanism in coated aluminum alloy under isothermal and thermo-mechanical fatigue loadings, 21th Annual International Conference on Mechanical Engineering, School of Mechanical Engineering (ISME2013), K.N. Toosi University of Technology, Tehran, Iran, 7-9 May, 2013, in Farsi

78.  R. Masoudi Nejad, S.M. Salehi, G.H. Farrahi, Simulation of railroad crack growth life under the influence of combination mechanical contact and thermal load, 3nd International Conference on Recent Advances in Railway Engineering (ICRARE2013) Iran university of science and Technology,Tehran, Apr 30-May 1, 2013

79.  S.M. Salehi, G.H. Farrahi, S.Sohrabpour, Dynamic analysis of the wear effect of wheel on instability of train and determination of optimum wear range, 3nd International Conference on Recent Advances in Railway Engineering (ICRARE2013) Iran university of science and ,Tehran, Apr 30-May 1, 2013, in Farsi

80.  S.M. Salehi, G.H. Farrahi, S.Sohrabpour, Stress analysis of mono-block wheel, 21th Annual International Conference on Mechanical Engineering, School of Mechanical Engineering (ISME2013), K.N. Toosi University of Technology, Tehran, Iran, 7-9 May, 2013, in Farsi

81.  R. Masoudi Nejad, S.M. Salehi, G.H. Farrahi, M. Chamani, Simulation of railroad fatigue crack growth under the influence of residual stress, , 21th Annual International Conference on Mechanical Engineering, School of Mechanical Engineering (ISME2013), K.N. Toosi University of Technology, Tehran, Iran, 7-9 May, 2013, in Farsi

82.  G.H. Farrahi, V. Kazerani, M.S. Ghorashi, Test Methodology and Wear Characteristics of Austenitic Stainless Steel AISI Type 316 at Cryogenic Environment, Proceedings of the World Congress on Engineering 2014 Vol II, pp. 1214-1217, WCE 2014, July 2 - 4, 2014, London, U.K. http://www.iaeng.org/publication/WCE2014/WCE2014_pp1214-1217.pdf

83.  Kashyzadeh K.R., Farrahi G.H., Shariyat M., Ahmadian M.T. Experimental And Finite Element Studies On Free Vibration Of Automotive Steering Knuckle. ICONTS 3RD International Congress on Technology-Engineering & Science, 09-10 February 2016, Kuala Lumpur, Malaysia.

84.  Jessica Taylor, Ali Mehmanparast, Elvin Eren, Weihong He, Gholam Hossein Farrahi, Review of crack arrest theory, techniques and applications on fracture mechanics, 14th International Conference on Fracture (ICF 14) June 18-23, 2017, Rhodes, Greece

85.  R. Tangestani, G.H. Farrahi, A. Mehmanparast, S. Ganguly, Effect of clamps on residual stress in wire and arc additively manufactured parts, 14th National Conference of Manufacturing, 24-26 October 2017, Arak, Iran

86.  B. Ahmadikia, A. Nourani, G.H. Farrahi, Experimental investigation of the effect of sever shot peening on high cycle fatigue of a welded joint, 18th national conference of welding and inspection (18th NCWI), Iranian Society of Welding and NDT, Arak, 6-7 February 2018

87.  M. Minaei, K. Reza Kashizadeh, G.H. Farrahi, The Gap effect on quality of spot welding, 18th national conference of welding and inspection (18th NCWI), Iranian Society of Welding and NDT, Arak, 6-7 February 2018

88.  K. Reza Kashyzadeh, G.H. Farrahi, M. Shariyat, M.T. Ahmadian , Experimental and probabilistic approach for assessing fatigue life of automotive steering knuckle, 26th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2018), Semnan University, Semnan, 24 - 26 April, 2018

89.  Sadegh Mirmehdi, Amir Nourani, Gholam Hossein Farrahi, The effect of constraint on fracture energy and fracture load prediction of solderjoints,  26th Annual International Conference of Iranian Society of Mechanical Engineers (ISME2018), Semnan University, Semnan, 24 - 26 April, 2018

90.  H. Jafarzadeh, G.H. Farrahi, M. Javanbakht, V.I. Levitas, Phase field approach to bridging between atomistic and macroscopic cohesive laws, The 27th Annual International Conference of Iranian Society of Mechanical Engineers-ISME2019, 30 April- 2 May, 2019, Tehran, Iran.

91.  A. Nourani, S. Mirmehdi, A.H. Shokrani, A. Eslaminia, G.H. Farrahi, Fracture toughness of lead-free solder joint as a function of geometric parameters, The 27th Annual International Conference of Iranian Society of Mechanical Engineers-ISME2019, 30 April- 2 May, 2019, Tehran, Iran.

92.  A.H. Borjali, G.H. Farrahi, H. Jafarzade, M. Chizari, Experimental study of a sheathed core bone plug in Bashti ACL reconstructive method, The 27th Annual International Conference of Iranian Society of Mechanical Engineers-ISME2019, 30 April- 2 May, 2019, Tehran, Iran.

93.  A. Nourani, M. Mohammadi Amiri, S. Mirmehdi, G.H. Farrahi Predicting fracture load of solder joints using Jci and Cohesive zone modelling, The 27th Annual International Conference of Iranian Society of Mechanical Engineers-ISME2019, 30 April- 2 May, 2019, Tehran, Iran.

94.