|
|
|
|
|
|
Ph.D. in Materials Science and Engineering, March 2002, Nagoya Institute of Technology (NIT), Nagoya, JAPAN. Subject : Formation and oxidation behavior of carbon containing refractories Supervisor : Prof. A. Yamaguchi M.Sc. in Materials Engineering (Ceramics), January 1996, Iran University of Science and Technology (IUST), Tehran, IRAN. Subject : Zircon based ceramic pigments Supervisor : Prof. F. Moztarzadeh B.Sc. in Materials Engineering (Ceramics), September 1992, Iran University of Science and Technology (IUST), Tehran, IRAN. Subject : Zrcon-Mullite refractories by slip casting. Supervisor : Prof. V. Marghusian Professional training A group-training course in “Ceramic Kiln and Firing Technology”, programmed by “Japan International Cooperation Agency” (JICA), conducted in “Technical Research Laboratory” at “Mino Yogyo Co. LTD”, (10/1994-02/1995). |
|
Ceramic Coating (Sol-Gel; Micro-Arc-Oxidation; Electro-Phoretic-Deposition) - Interconnects for SOFC - Ceramic coatings on Al, Ti,
Mg substrates Carbon Containing Refractories Synthesis: ceramic powders, pigments and nano-fibers - Processing: Gel-Casting,
Injection-Molding, Spark-Plasma-Sintering (SPS) - Microstructure and Properties |
|
Graduate: Modern refractories Non-oxide engineering ceramics Modern Ceramic manufacturing processes Ceramic pigments Undergraduate: Refractories Principles of Ceramic Engineering Kinetic in ceramics |
|
Graduate deputy of Materials Science & Engineering Department, Sharif University of Technology, (01/2010~01/2014) Head of Ceramic Division in Materials Science & Engineering Department, Sharif University of Technology, (04/2009~06/2014) Assoc. Prof., Materials Science & Engineering Department, Sharif University of Technology, (01/2008~now) Asst. Prof., Materials Science & Engineering Department, Sharif University of Technology, (08/2002~01/2008) Head of designing and process engineering unit, Irana Tile Co., Tehran, Iran, (09/1994~12/1997) Other Academic Activities Sabbatical at University of
Toronto, Faculty of Applied Science and Engineering, Centre for Advanced
Coating Technologies (06/2014~07/2015) Directing board member of “Iranian Ceramic Society” (04/2009~04/2011) Directing board member of “Iranian Ceramic Society” (12/2002~12/2004) Scientific
committee chair of “The 8th Iranian Ceramic Congress”, Tehran, 3-4 May 2011. |
|
Monbusho (Japanese Government) Scholarship for PhD course in Japan. |
|
Recent
International Journal Papers:
1. M. Fakouri
Hasanabadi, M.A. Faghihi
Sani, A.H. Kokabi, J. Malzbender;
The analysis of torsional shear strength test of sealants for solid oxide fuel
cells; Ceramics International, 43 (2017) 12546–12550.
2.
S. Khamseh, H. Araghi, M. Ghahari, M. A. Faghihi Sani;
Microstructure and thermochromic properties of
VOX–WOX–VOX ceramic thin films; Appl. Phys. A (2016) 122:231.
3. S. Sarbishei, M.A. Faghihi Sani,
R. Mohammadi; Effects of alumina nanoparticles
concentration on microstructure and corrosion behavior of coatings formed on
titanium substrate via PEO process; Ceramics International, 42 (2016) 8789–8797.
4. M. Mirzaei, A. Simchi, M.A. Faghihi Sani, A. Yazdanyar;
Electrophoretic deposition and sintering of a nanostructured manganese–cobalt
spinel coating for solid oxide fuel cell interconnects; Ceramics International,
42 (2016) 6648–6656.
5. N. Barati, E.I. Meletis, F. Golestani Fard, A. Yerokhin, S. Rastegari, M.A. Faghihi Sani; Al2O3–ZrO2
nanostructured coatings using DC plasma electrolytic oxidation to improve tribological properties of Al substrates; Applied Surface
Science, 356 (2015) 927–934.
6. Hediyeh
Khatibnezhad, Mohammad Ali Faghihi
Sani; Preparation and characterization of nanostructured TiO2 thin
film codoped with nitrogen and vanadium on glass
surface by sol–gel dip-coating method; Res Chem Intermed (2015) 41:7349–7361.
7. N. Mozaffari, M. R. Mohammadi, M.A. Faghihi-Sani;
Development of block copolymer-templated crack-free mesoporous anatase-TiO2 film:
tailoring sol–gel and EISA processing parameters and photovoltaic
characteristics; J Mater Sci: Mater Electron (2015)
26:1543–1553.
8. Sahand
Sarbishei*, Mohammad Ali Faghihi
Sani, Mohammad Reza Mohammadi; Study plasma
electrolytic oxidation process and characterization of coatings formed in an
alumina nanoparticle suspension; Vacuum 108 (2014) 12-19.
9. F. Einkhah, Kang Min Lee, M.A. Faghihi-Sani,
Bongyoung Yoo, Dong Hyuk Shin; Structure and corrosion behavior of oxide layer
with Zr compounds on AZ31 Mg alloy processed by
two-step plasma electrolytic oxidation; Surface & Coatings Technology, 238
(2014) 75–79.
10. Sanaz Naghibi, Mohammad
Ali Faghihi Sani, Hamid Reza Madaah
Hosseini, Mohammad Ali Shokrgozar, Morteza Mehrjoo; Mortality
response of folate receptor-activated, PEG–functionalized TiO2 nanoparticles
for doxorubicin loading with and without ultraviolet irradiation; Ceramics
International, 40 (2014) 5481–5488.
11. V. J. Kharanagh, M.A. Faghihi-Sani,
E. Rafizadeh; Effect of current frequency on coating
properties formed on aluminized steel by plasma electrolytic oxidation; Surface
Engineering, 30 [ 3] (2014) 224-228.
12. A. Nojoomi, M.A. Faghihi-Sani,
M. Khoshkalam; Shear-rate dependence modeling of gelcast slurries: Effects of dispersant content and solid
loading; Ceramics International, 40 (2014) 123-128.
13. A. Kazemi, M.A. Faghihi-Sani,
M.J. Nayyeri, M. Mohammadi,
M. Hajfathalian; Effect of zircon content on chemical
and mechanical behaviour of silica-based ceramic
cores; Ceramics International, 40 (2014) 1093-1098.
14. Sanaz Naghibi, Mohammad
Ali Faghihi Sani, Hamid Reza Madaah
Hosseini; Application of the statistical Taguchi method to optimize TiO2 nanoparticles
synthesis by the hydrothermal assisted sol–gel technique; Ceramics
International 40 (2014) 4193–4201.
15. G. Jalilvand, M.A. Faghihi-Sani;
Fe doped Ni-Co spinel protective coating on ferritic stainless steel for SOFC
interconnect application; International Journal of Hydrogen Energy, 38 (2013)
12007-12014.
16. M. Khoshkalam, M.A. Faghihi-Sani;
An investigation on mechanical properties of Alumina-Zirconia-Magnesia Spinel
composite ceramics fabricated by gel-casting using solution combustion
synthesized powder; Materials Science & Engineering A, 587 [10] (2013)
336-343.
17. A. Kazemi, M.A. Faghihi-Sani,
H.R. Alizadeh; Investigation on cristobalite
crystallization in silica based ceramic cores for investment casting; Journal
of the European Ceramic Society, 33 (2013) 3397-3402.
18. M. Khoshkalam, M.A. Faghihi-Sani;
A. Nojoomi; Effect of zirconia content and powder
processing on mechanical properties of gelcasted ZTA
composite; Transactions of the Indian Ceramic Society, 72 [3] (2013) 175-181.
19. A. Ghaffari, M.A. Faghihi-Sani,
F. Golestani-Fard, M. Nojabayy;
Diffusion and solid solution formation between the binary carbides of TaC, HfC and ZrC;
Int. Journal of Refractory Metals and Hard Materials, 41 (2013), 180-184.
20. S. Naghibi, H.R. Madaah-Hosseini, M.A.
Faghihi-Sani; Colloidal stability of dextran and
dextran/poly ethylene glycol coated TiO2 nanoparticles by
hydrothermal assisted sol–gel method; Ceramics International 39 (2013)
8377–8384.
21. H. Rashtchi, M.A. Faghihi-Sani,
A.M. Dayaghi; Effect of Sr
and Ca dopants on oxidation and electrical properties of lanthanum
chromite-coated AISI 430 stainless steel for solid oxide fuel cell interconnect
application; Ceramics International 39 (2013) 8123–8131.
22. M. Zarabian, A. Yazdan Yar, S. Vafaeenezhad, M.A.
Faghihi-Sani, A. Simchi;
Electrophoretic deposition of functionally-graded NiO–YSZ
composite films; Journal of the European Ceramic Society 33 (2013)
1815–1823.
23. A. Davarpanah, M.A. Faghihi-Sani,
K. Shabani, M. Bodaghi;
Production of net-shaped dense metal-carbide-based composites through an
infiltration process at intermediate temperature; Int. Journal of Refractory
Metals and Hard Materials 38 (2013) 35–39.
24. H. Hatami Ramsheh, M.A. Faghihi-Sani, A.H. Kokabi;
Microstructure and mechanical properties of MoSi2–MoSi2 joints
brazed by Ag–Cu–Zr interlayer; Materials and Design
49 (2013) 197–202.
25. S.A. Ghaffari, M.A. Faghihi-Sani,
F. Golestani-Fard ,H. Mandal; Spark plasma sintering
of TaC–HfC UHTC via disilicides sintering aids; Journal of the European Ceramic
Society 33 (2013) 1479–1484.
26. N. Barati, M.A. Faghihi Sani,
H. Ghasemi; Photocathodic
Protection of 316L Stainless Steel by Coating of Anatase
Nanoparticles; Protection of Metals and Physical Chemistry of Surfaces, 2013,
Vol. 49, No. 1, pp. 109–112.
27. S.A. Ghaffari, M.A. Faghihi-Sani,
F. Golestani-Fard, S. Ebrahimi,"
Pressureless sintering of Ta0.8Hf0.2C
UHTC in the presence of MoSi2", Ceramics International, 39
(2013) 1985-1989.
28. M.A. Faghihi-Sani, A. Arbabi, A. Mehdinezhad-Roshan, "Crystallization of hydroxyapatite
during hydrothermal treatment on amorphous calcium phosphate layer coated by
PEO technique", Ceramics International, 39 (2013) 1793-1798.
29. M. Golmohammad, A. Nemati, M.A.
Faghihi Sani; SYNTHESIS AND DIELECTRIC PROPERTIES
OF NANOCRYSTALLINE BASRTIO3; International Journal of Modern Physics; 5, (2012)
188-195.
30. A. Beitollahi, Sh. Pilevari, M.A.
Faghihi Sani, H. Moradi,
M. Akbarnejad, "In situ growth of carbon
nanotubes in alumina-zirconia nanocomposite matrix prepared by solution
combustion method", Ceramics International, 38, (2012) 3273-3280.
31. M.R. Pouyamehr, A. Nemati, M.A.
Faghihi Sani, R. Naghizadeh;
The effect of dolomite type and Al2O3 content on the phase composition in
aluminous cements containing spinel; 55, [2], (2011) 169-175.
32. M. Maleki Shahraki, S. A. Shojaee, M. A. Faghihi
Sani, A. Nemati; Two-step Sintering
of ZnO varistors; Solid
State Ionics, 190 (2011) 99-105.
33. N. Sahraei, M.A. Faghihi-Sani;
Idle time and gelation behavior in gelcasting process
of PSZ in acrylamide system, Ceramic Transactions, The American Ceramic
Society, 212 (2010) 105-113.
34. M. Riahi, M.A. Faghihi-Sani;
The study of preparation of blue V zircon pigment by using zircon and sulfuric
acid, Ceramic Transactions, The American Ceramic Society, 212 (2010) 197-206.
35. M. Sharif, M.A.
Faghihi-Sani, F. Golestani-Fard,
A. Saberi, A. Khalife Soltani, Coating of graphite
flakes with MgO/carbon nanocomposite via gas state
reaction, Journal of Alloys and Compounds 500 (2010) 74–77.
36. S. A. Shojaee, M. Maleki Shahraki, M. A. Faghihi
Sani, A. Nemati; Microstructural and electrical
properties of varistors prepared from coated ZnO nanopowders; J Mater Sci: Mater Electron, (2010) 21:571-577.
37. M. Maleki Shahraki, S. A. Shojaee, A. Nemati, M. A.
Faghihi Sani; High voltage SnO2 varistors prepared from nanocrystalline
powders; J Mater Sci: Mater Electron, (2010)
21:199-205.
38. N. Barati, M.A. Faghihi Sani,
H. Ghasemi, Z. Sadeghian,
S.M.M. Mirhoseini; Preparation of uniform TiO2 nanostructure
film on 316L stainless steel by sol–gel dip coating; Applied Surface Science
255 (2009) 8328–8333
39. H. Ghasemi,
A.H. Kokabi, M.A. Faghihi
Sani, Z. Riazi; Roles of preoxidation,
Cu2O particles, and interface pores on the strength of eutectically bonded Cu/α-Al2O3;
Materials and Design, 30 (2009) 1098-1102.
International Conference Papers:
2. Feryar Einkhah, Kang Min Lee, Bongyong Yoo, Dong Hyuk Shin, M.A. Faghihi-Sani;
The preparation of ZrO2-containing oxide layers on Mg alloy prepared by two
step plasma electrolytic oxidation; The 223rd Meeting of The Electrochemical
Society, Toronto, Canada, May 12 -16, 2013.
3. S.Sarbishei, M.A.Faghihi
Sani, M. Mohammadi; FABRICATION OF
ALUMINA-SILICATE NANOCOMPOSITE COATING ON TITANIUM SUBSTRATE VIA MICRO ARC
OXIDATION METHOD AND INVESTIGATION OF CURRENT DENSITY EFFECT ON THE WEAR
BEHAVIOR OF COATING; The First International and the Sixth Joint Conference of
Iranian Metallurgical Engineering Society and Iranian Foundrymen’s
Society, School of metallurgy and material engineering, college of engineering,
University of Tehran, 6-8 December 2012.
4.
G. Jalilvand, M.A. Faghihi
Sani; EFFECT OF DIP COATING PARAMETERES ON NANOSTRUCTURED NiCo2O4
SPINEL COATING BY SOL-GEL METHOD FOR SOFCS; The First International and the
Sixth Joint Conference of Iranian Metallurgical Engineering Society and Iranian
Foundrymen’s Society, School of metallurgy and
material engineering, college of engineering, University of Tehran, 6-8
December 2012.
5.
S. Naghibi, H. Maddah, M.A.
Faghihi Sani; Synthesis of TiO2-PEG-Folic Acid
Nanocomposites for Drug Delivery and Cancer Therapy; 4th International
Conference on Nanostructures (ICNS4), Kish Island, Iran, March, 2012.
6.
M.A Yousefpour, ZA Taherian,
M. A. Faghihi Sani, A. Nemati;
Synthesis of meso porous silica Hydroxy
apaatite nonacomposite;
Advances in applied physics and materials science - APMAS 2011; Antalia, Turkey, May, 2011.
7.
A.M. Fazeli, M.A. Faghihi
Sani, F. Einkhah; Corrosion and erosion-corrosion
behavior of ceramic coatings on titanium substrate
using plasma electrolytic oxidation process; effect of frequency; The 8th
Asian-European International Conference on Plasma Surface Engineering; Dalian
University, Dalian, China, Sep., 2011.
8.
F. Faraghnia, M. A. Faghihi
Sani, S. Bagheshaee; Effect of mineralizer on the
sysnthesis of silica-hematite nano
composite; The 2nd international conference on composites; Kish Island, Iran,
December, 2010.
9.
F. Mehdizadeh, A. Nemati, M.A.
Faghihi Sani, M. Fazeli;
Study of the antibacterial activity of glaze surface with nano
silver diffusion; International Conference on Nanoscience and Nanotechnology;
Shiraz University, Shiraz, Iran, November, 2010.
10.
F. Faraghnia, M. A. Faghihi
Sani, S. Bagheshaee, Sh. Sadeghinejad,;
The affection of calcination temperature on the synthesis of silica-hematite nano red pigment; International Conference on Nanoscience
and Nanotechnology; Shiraz University, Shiraz, Iran, November, 2010.
11.
Sh. Sadeghinejad, M.A. Faghihi
Sani, A. Maghsudipour, F. Faraghnia;
Hyrothermal synthesis of nano
powder yttria-stabilized zirconia: the effect of
mineralizer; International Conference on Nanoscience and Nanotechnology; Shiraz
University, Shiraz, Iran, November, 2010.
12.
H. Rashtchi, M. A. Faghihi
Sani; Lanthanum chromite coating on stainless steel by sol-gel dip coating
technique for use as interconnect plates in solid oxide fuel cells; 5th
International Conference on surface, coating and Nanostructured Materials
(NANOSMAT); Reims, France, October, 2010.
13.
R. Soltani, M. A. Faghihi
Sani, F. Mohaghegh; The effect of Temperature and
N2:C2H2 flow rate on the growth of carbon nanotubes synthesised by CCVD of
acetylene on alumina-zirconia support; 5th International Conference on surface,
coating and Nanostructured Materials (NANOSMAT); Reims, France, October, 2010.
14.
F. Dabir, M. A. Faghihi
Sani, N. Barati; Hydroxyapatite/titania
nanostructure biocoating on Ti6Al4V alloy by sol-gel
dip-coating, The 3rd Conference on Nanostructures (NS2010), Kish Island, I.R.Iran, March 10-12, 2010,.
15.
S. M. M. Mirhosseini, M. A. Faghihi
Sani, B. Farshid, M. Meghdari;
Methodical study of the micro arc oxidation processes on titanium alloy Ti6Al4V
for corrosion protection in SBF; Seventh Asian-European International
Conference on Plasma Surface Engineering (AEPSE 2009); Busan, Korea, September
20-25, 2009.
16.
S. M. M. Mirhosseini, M. A. Faghihi
Sani, B. Mozooni, M. Meghdari;
Using of Taguchi method in optimization of plasma electrolytic aluminosilicate
coatings on aluminium for corrosion protection; Seventh Asian-European
International Conference on Plasma Surface Engineering (AEPSE 2009); Busan,
Korea, September 20-25, 2009.
17.
N. Sahraei, M.A. Faghihi
Sani; Idle Time and Gelation Behavior in Gelcasting Process of PSZ, in Acrylamide System; 8th
Pacific Rim Conference on Ceramic and Glass Technology, Vancouver, B. C.,
Canada, May 31- June 5, 2009.
18.
M. Riahi, M.A. Faghihi
Sani; Study of Preparation of Blue V-zircon Pigment by Using Zircon and
Sulphuric Acid; 8th Pacific Rim Conferece on Ceramic
and Glass Technology, Vancouver, B. C., Canada, May 31- June 5, 2009.
19. M. A. Faghihi Sani, N. Barati, Z. Sadeghian; Preparation of Homogenous Thin Film of Anatase Nanoparticles on 316L by Sol-Gel Dip Coating,
Processing and Fabrication of Advanced Materials XVII (PFAM 17), New Delhi,
India, 15-17 Dec. 2008.
20. S. Arvandi,
M. A. Faghihi Sani, Mechanical properties of Al2O3-ZrO2
nanocomposite fabricated by gel casting, Processing and Fabrication of Advanced
Materials XVII (PFAM 17), New Delhi, India, 15-17 Dec. 2008.
22. S. Naghibi, Z.A. Nemati, M.A. Faghihi Sani, H. Paidar; The effects of
Graphite and Resin Contents on the properties of dolomite-graphite refractories;
Unified Iinternational Technical Conference on
Refractories, Ohio, USA, Nov. 2005.
23. A. Kazemi,
Z.A. Nemati, M.A. Faghihi
Sani, F. Zahed; Partially Stabilization of
Zirconia and its Effects on the Magnesia-Spinel Refractory Properties, Unified Iinternational Technical Conference on Refractories, Ohio,
USA, Nov. 2005.
24. V. Rahimi
Dizaji, M. Rahmani, M. Faghihi Sani, Z. Nemati, J.
Akbari, Microstructure and cutting performance investigation of Ti(C,N)-based cermets containing
various types of secondary carbides, Tehran International Congress on Manufacturing
Engineering (TICME 2005), Tehran, Iran, 12-15 Dec. 2005.
25. M.A.
Faghihi Sani & F. Golestani
Fard, “Thermochemical Stability of Spinel Under
Reducing Conditions”, Tehran International Conference on Refractories, Tehran,
Iran, 4-6 May, 2004.
26. Z.A. Nemati,
S. Naghibi, M.A. Faghihi
Sani, H. Paidar; The effects of different
parameters on the properties of dolomite-graphite refractories; International
Conference on Refractories, Achen, Germany, 13-14
Oct, 2004.
27. Z.A. Nemati,
M.A. Faghihi Sani, A. Kazemi, F. Zahed; The effects of zirconia additives on the properties of
magnesia-spinel refractories; International Conference on Refractories, Achen, Germany, 13-14 Oct, 2004.
|
M.A. Faghihi Sani, S.M. Zorrieh S., A. Arbabi,
Introduction to Drying of Ceramics, Iranian Ceramic Society, 286 pages,
ISBN: 964-6930-90-5 (Aug. 2007). |